ADEMCO's VISTA-50P control panel provides the flexibility of up to eight independent partitions with the economy of a single control. Nine hardwired zones standard. Expandable to 87 total zones. Eight partitions standard. 75 user codes work in all partitions. Seven authority levels. 224 event memory log/printer option. Four trigger outputs. 5800 wireless compatibility. Supports two-wire multiplex. Scheduling of events (real time clock). Keypad macro features. Master console option for viewing all partitions at a glance. Common lobby logic. Fast downloading. Supports up to 16 relays and/or X-10. Quick start programming. False alarm features. UL Commercial Burglary listed (VISTA-50PUL).
When your installation requirements call for additional relay outputs,
the 4204 is your answer. The 4204 Intelligent Relay Board adds relays which
are connected to the Control/Communicator via the control's console wiring.
The relay outputs are programmed by the appropriate control for a variety
of functions.
The ADEMCO 4208U Remote Point Module (RPM) is an eight-zone expander that allows the use of available expansion zones on ADEMCO controls that support V-Plex polling loop devices.
With the newly enhanced VISTA Interactive Phone Module (VIP) your customers can perform all the functions of a wall mounted keypad using any ordinary touchtone phone, from their home or any remote location. They can check security system status, arm or disarm their system -- even operate lights and appliances. The VIP’s high quality voice output, with its large vocabulary, verbally identifies open zones and prompts your customer to take appropriate action.
Self Contained Indoor Siren -- At 119 db, the 748 is the loudest self-contained siren you can buy today. The fully tampered and weather-resistant 748 mounts directly to a 4" electrical box or wall -- eliminating the need for a cabinet. Priced below other sirens, the compact design of the attractive 748 makes installation easier than ever before -- indoors or out.
Hinged - The Wave's unique snap-open HINGED CASE DESIGN - an industry first for sounders - allows for installation without disassembly. TERMINAL STRIP - no soldering or splicing required. Recessed Wave 2F The Wave-F speaker and Wave 2F siren can be RECESSED in a standard double gang electrical box.
The ELK-150RT is a self-contained Siren in a tampered "No Rust" stainless steel enclosure. It features two sealed reed tamper switches, one on the Back plate and one on the Front Cover. The switches are normally closed and pre-wired in series. The ELK-150RT can produce two distinct sounds from a single input trigger. The stainless steel exterior reflects the color of the mounting surface allowing the ELK-150RT to blend easily with any residential or commercial building.
The ELK-RJSET is for use with Alarm System Communicators, Line Fault devices, or other equipment as a means of connecting to the incoming telephone line. Includes USOC RJ31X 8 pin modular surface mount jack and 6 ft. 8 wire modular cord with plug on one end and spade terminals on the other.
The Genius' Double Dual™ Optic System is controlled by a powerful microprocessor, which uses Crow's proprietary digital signal analysis to produce a three-dimensional thermal image of the protected area. It remembers this image, and focuses only on the intruder. It will automatically adapt to environmental changes in wind, temperature and background noise. When conditions change, the Genius's compensation circuitry automatically adjusts itself to the new conditions, maintaining sensitivity level and detection capability with virtually no false alarms.
The security logic for the Genius is embedded in the ASIC component and cannot be violated or decoded, making it perfectly suited for high security applications.
Visonic Spy 1 Inconspicuous Long-Range Miniature PIR Motion Detector
Spy 1 is the world's smallest detector offering inconspicuous protection for corridors and passageways as well as control of CCTV, access control and similar systems. It can be flush-mounted in a wall or installed from behind the wall, providing a single, double beam with coverage of up to 11m/17o (35ft/17o).
Visonic Spy 2 Inconspicuous, Medium Angle, Miniature PIR Motion Detector
Spy 2 is the world's smallest detector offering inconspicuous protection for rooms, wide corridors and passageways as well as control of security, CCTV and other systems. It can be flush-mounted in a wall or installed from behind the wall, providing a coverage of three double beams in a single detection layer, with a maximum coverage area of 8m/50º (25ft/50º).
Visonic Spy 3 Concealed Wide-Angle Miniature PIR Motion Detector
Spy 3 is the world's smallest detector offering concealed protection for rooms and supporting various other control and access applications. It is flush-mounted in a wall, providing coverage of six double-beams in a single detection layer, with a maximum coverage area of 8m/100° (25ft/100°).
Visonic Spy 4 Inconspicuous Miniature Curtain PIR Motion Detector
Spy 4 is the world's smallest detector offering inconspicuous curtain protection for corridors, passageways, doors and windows as well as support for access control, CCTV and various other control applications. It can be flush-mounted in a wall or ceiling or installed from behind the wall or the ceiling, providing a solid-curtain coverage of up to 2m width x 4m height (6 x 12ft).
FlexCore™ Signal Processor - The FlexCore Signal Processor is an Application-Specific Integrated Circuit (ASIC), which processes sound data in parallel rather than sequentially for faster, more accurate detection decisions. The combination of proven FlexGuard™ performance with the speed of FlexCore processing provides unmatched false alarm immunity without compromising detection.
IntelliSense FG-1625F Flush Mount Glassbreak Detector
The new FG-1625F Glassbreak Detector uses the latest technology to provide faster response and increased false alarm immunity. The FG-1625F is specifically designed to allow fast, easy installation, while the adjustable sensitivity settings can compensate for the acoustics of any room. Optimum operation can be quickly verified using the FG-701 Glassbreak Simulator. The FG-1625F was designed to adequately cover all sizes of single gang electrical boxes. Flush mount installations are now easier and better looking than ever.
The new FG-1625R Glassbreak Detector uses the latest technology to provide faster response and increased false alarm immunity. The FG-1625R is specifically designed to allow fast, easy installation, while the adjustable sensitivity settings can compensate for the acoustics of any room. Optimum operation can be quickly verified using the FG-701 Glassbreak Simulator.
The new FG-1625RFM Glassbreak Detector uses field proven FlexGuard® technology to provide faster response and increased false alarm immunity. The FG-1625RFM is specifically designed to allow a fast, easy installation, while the adjustable sensitivity settings can compensate for the acoustics of any room. Optimum operation can be quickly verified using the FG-701 Glassbreak Simulator.
System Sensor’s i3™ series smoke detectors represent a significant advancement in
conventional detection. The i3 family is founded on three principles: Installation
ease, Intelligence, and Instant inspection.
