Honeywell Vista-GSM Snap-in Radio Module for Vista-21iP Control

Honeywell 1361X10 X-10 Plug-In Transformer

• Provides the most powerful yet simple solution for controlling lights and appliances through X-10 compatible AC line carrier.
• Provides both power to the panel and direct signaling capability to the existing AC wires.
• Simple to wire
• Only requires one AC outlet

Honeywell 1451-24 Transformer

Transformer in red cabinet for fire applications

4100SM Serial Interface Module

Interface for printer for: VISTA-50P, VISTA-100, VISTA-128B and VISTA-128FB

4286 VISTA Interactive Phone Module

With the newly enhanced VISTA Interactive Phone Module (VIP) your customers can perform all the functions of a wall mounted keypad using any ordinary touchtone phone, from their home or any remote location. They can check security system status, arm or disarm their system -- even operate lights and appliances. The VIP’s high quality voice output, with its large vocabulary, verbally identifies open zones and prompts your customer to take appropriate action.

Honeywell 4297 Isolation / Extender Module

Description
The 4297 V-Plex Loop Isolation/Extender Module offers dual benefits for commercial applications. As an isolation module, the 4297 allows installers to group selected zones on one loop. For example, fire and burglary zones may be grouped separately; essentially isolating one from another. This isolation feature prevents failure in one loop from compromising the integrity of any other loop. The 4297 Module also gives installers the flexibility to extend system-wide wiring capability, from approximately 4000 ft to 8000 ft., without the added expense of additional hardware or control panels.

Features

• Isolate open and short circuit faults from main V-Plex loop
• Provides additional V-Plex loop current
• V-Plex loop isolation between primary and extended loop
• Fully supervised
• Separate DC input, no current drain from primary V-Plex loop
• Monitors DC power input

Additional Information

• V-Plex Addressable Technology

Ordering Information

Part No.	Description
4297	Isolation / Extender Module

Honeywell 4500 Thermostat Module

The 4500 thermostat provides control for both heat and air conditioning. It is intended for use with Honeywell security systems that include the enhanced 4286 phone module. You can set the 4500 thermostat using any touch-tone phone, either on premises or remotely.

Honeywell 659EN Line Fault Monitor

Monitors telephone line. Use to activate sirens and strobes if phone line is cut or disabled. Can also trigger backup monitoring devices.

Honeywell 7845GSM Digital Cellular Communicator

Honeywell is focused on providing the future of alarm communication solutions for the security industry. Alternative communication methods are critical in the marketplace due to VoIP, migration from POTS, and growth of digital radio networks.

Honeywell AD12612 Auxiliary Power Supply / Battery Charger

• Provides 6 or 12 VDC (6 or 12 volt operation)
• 1.2 Amps continuous output to power devices
• Transformer purchased separately
• Factory preset at 13.6 VDC, with the jumper set to supply 12 volts DC
• Use transformer 1322/TF3 for 6 volt operation...1361 for 12 volts DC

Honeywell AD25624 Auxiliary Power Supply / Battery Charger

• Provides 12 or 24 VDC (12 or 24 volt operation)
• 2.5 Amps continuous output to power devices
• Transformer purchased separately
• Use transformer N1330 for 12 volt operation – XF30 for 24 volts DC

Honeywell CIA MODEM: Special Modem For Compass Downloader Software

The Communication Interface Adapter (CIA) provides dedicated, error-free, remote connection between ADEMCO Group control panels and ADEMCO Group downloading software. This external modem connects to one of the COM ports of your downloading computer and the outside phone line used for communication to the control panel.

Honeywell VA8200 Panel Linking Module

Description
The VA8200 Panel Linking Module (PLM) allows up to eight VISTA-128BP/128FBP or VISTA-250BP/250FBP commercial alarm control panels to be linked together. Panel Linking allows multiple users to arm, disarm and check status of any partition, for any panel, all from one location. Each module connects to the ECP bus on the control panel, and communicates to other PLMs via the RS-485 bus (three wire twisted cable).

Note: Special order item. Non-returnable or subject to restocking fees.

Honeywell VISTA-ULKT UL Commercial Security Upgrade Kit

Attack and crush-proof, this heavy-duty steel cabinet is designed to meet UL commercial requirements for burglary applications. The kit comes complete with enclosure and mounting equipment.

Honeywell Vista ICM Internet Connection Module

Honeywell's Internet Connection Module (ICM) for VISTA is an exciting device that provides your customers with easy and affordable control via an IP-based web interface – enabling home security and HVAC to work together to make their homes safer and more comfortable. The ICM seamlessly integrates with Honeywell's VISTA series security control system and the Honeywell Enviracom™ Thermostat (Model T8635L and VisionPro IAQ) when used with the 6100ICM. The ICM has its own setup wizard that makes installation quick and easy. No installation software is required.

Honeywell VISTANAV Vista Navigator CD-ROM

The Vista software consisting of two applications on one CD that allows commercial and residential end-users to control a system, program basic functions, as well as filter and sort the event log into usable reports.

Honeywell 4204 Intelligent Relay Board

When your installation requirements call for additional relay outputs, the 4204 is your answer. The 4204 Intelligent Relay Board adds relays which are connected to the Control/Communicator via the control's console wiring. The relay outputs are programmed by the appropriate control for a variety of functions.

Honeywell 4204CF Supervised Notification Appliance Module

The 4204CF provides two programmable, on-board, styled B on selected panels supervised notification appliance outputs; applications include supervised bells, strobes, sirens or interface to other equipment.

Honeywell 4101SN Addressable Relay Module

The Honeywell 4101SN V-Plex™ Single Output Relay Module is an accessory for use with ADEMCO control panels that support serial number addressable polling loop output devices.

Honeywell 4190SN Two-Zone Remote Point Module

The Honeywell 4190SN addressable V-PlexTM module is a two-zone expander which allows use of the available expansion zones provided by Honeywell controls that support V-Plex devices.

• Micro-miniature two-zone V-Plex™ adapter
• Makes any hardwired contact device V-Plex™ ready
• Built-in serial number for addressing
• One supervised zone and one unsupervised zone
• UL listed fire and burglary applications

Honeywell 4208SN Serialized Eight Zone Remote Point Module

The 4208SN Remote Point Module (RPM) is an eight-zone expander that allows the use of available expansion zones on ADEMCO controls that support V-Plex polling loop devices.

Honeywell 4208SNF Addressable Universal Expander Module

The Honeywell 4208SNF Remote Point Module (RPM) is a UL listed 8 zone expander that provides (6) class B and (2) class A expansions zones to any VISTA Fire/Burg control panel that supports serial V-Plex polling loop devices.

V-Plex™ Universal Eight Zone Remote Point Module

The ADEMCO 4208U Remote Point Module (RPM) is an eight-zone expander that allows the use of available expansion zones on ADEMCO controls that support V-Plex polling loop devices.

Honeywell 4209U V-Plex Group Zoning Remote Point Module

The 4209U Group Zoning Module streamlines large or expanded system installation. In retrofit applications, installers can utilize existing hardwired smoke detectors (UL Compatibility Listed) and wiring to expand system-wide smoke detector capability and capacity. The 4209U also offers flexible zone configurations to meet the varying demands of commercial applications.

Honeywell VSI V-Plex Short Isolator

Designed to work on all Honeywell V-Plex polling loops, the VPLEX-VSI provides short circuit isolation for devices on compatible control panels. When a short occurs on a polling loop branch, it illuminates a trouble LED and isolates the defective branch from the system -- enhancing life safety and protection while reducing troubleshooting time and maintenance costs.