Black Box USA MD650A-13 Universal Fiber Optic Line Driver Transceiver (1310 nm)

Universal Fiber Optic Line Driver Transceivers enable you to transmit and receive the signals over fiber optic cabling in both point-to-point or drop-and-repeat topologies. You can even mix protocols. For instance, you can set one transceiver to interface with an RS-232 device at one end and another to interface with an RS-485 device at the opposite end. There's no need for a converter box at either end of the fiber link!

Universal Fiber Optic Line Driver Transceivers also offer a wide range of speeds and distances: up to 21.75 miles (35 km) with the single-mode version.

Specifications

• Distance (Maximum): MD650A-85: 4 km (2.4 mi.); MD650A-13: 35 km (21.75 mi.)
• Operating Wavelength:
  MD650A-85: Multimode 850 nm;
  MD650A-13: Single-mode 1310 nm
• Operation: Simplex, full or half-duplex, point-to-point or multipoint
• Protocol: Asynchronous
• Signal Interface: 2- or 4-wire: RS-232, RS-422, RS-485
• Speed (Maximum): RS-422, RS-485: Low speed: 2.1 Mbps; High speed: 10 Mbps;
• RS-232: 200 kbps
• CE Approval: Yes
• Connectors: (1) terminal block, (1) pair of ST®
• Power:
  Input: 100 to 240 VAC, 50/60 Hz;
  Output: 12 VDC
• Size: 1.3"H x 3.5"W x 4"D (3.3 x 8.9 x 10.2 cm)

Buying Tip: NOTE: Must be used in pairs.

These products work with:

• Multimode, 62.5-Micron, Breakout-Style Bulk Fiber Optic Cables (EXN1002A)
• Single-Mode, 8.5-Micron, Distribution-Style Bulk Fiber Optic Cables (EXN006A, EXN012A)