COSTAR 12SIR Carbon Monoxide Alarm for Security Systems

• Suited for Residences, Motels, Hotels, and Commercial or Industrial System Applications.
• NOT for RV use.
• 12 SIR CO Alarms Connect to 4 to 6 Wire Connections to 12VDC Alarm System Control Panels.
• UL2075 Listed Household Fire and/or Burglary Panel with Auxiliary Signaling Zones. Connect to Signaling Zones Which Can Be Designated for CO Alarm Use Only.
• Approvals: UL Listed to Category Gas and Vapor Detectors and Sensors (FTAM).
• 6-year manufacturer's limited warranty.

Comprehensive 465 AES/EBU TO S/PDIF DIGITAL AUDIO TRANSCODER

Macurco CM-15 UL Listed Carbon Monoxide (CO) detector for use with fire and security alarm systems

UL Listed to UL 2075 for use with systems. Flush or Surface mount, 12-24 VAC or VDC operation, N.O. or N.C. alarm relay, N.C. trouble relay, visual display.

Macurco CM-2B Analog Carbon Monoxide Transducer

Analog CO transducer for use with HVAC/Building Automation Systems. Digital meter (0-250ppm), NEMA 1 enclosure, 24 VAC or VDC operation, 4-20ma output.

Macurco CM-15A Carbon Monoxide Detector with Buzzr

For use with alarm systems. The CM-15A is a 12/24 VAC or VDC Carbon Monoxide Detector with a buzzer. The CM–15A is designed for connection to UL Listed Alarm Control Panels (Fire or Fire/Burglar or Critical Process Management Equipment).

Macurco CM-1B Carbon Monoxide Detector: Stand-Alone or Remote Control

CO detector for use as stand-alone detector or to control another device. Digital meter (0-250ppm), 2 relays, 85db buzzer, 12-24 VAC or VDC operation.

Macurco CM-21A Carbon Monoxide Detector and Fan Controller (CM21A)

CM-21A CO detector and fan controller, individual or use with control systems. Mounts in 4x4 box, meets OSHA standards, fan and alarm relays, 12-24 VAC or VDC operation.

Macurco CM-3 CO Transducer and Meter: Ventilation Control and Automation Systems

Macurco series's Carbon Monoxide Transducer and Digital Meter with Supervised Electro-Chemical Sensor (CM-3). Digital Meter (0-250ppm), 4-20mA output SPDT adjustable fan control relay, NEMA 1 enclosure, 12-24V operation, accurate/linear electro-chemical sensor.

Macurco SS103 CO Fan Controller: Monitor 3 (SS103-3A) or 10 (SS103-10A) Remote Detectors

SS103 CO fan controller to monitor up to three (SS103-3A) or ten (SS103-10A) remote detectors. Adjustable alarm settings, three 10amp relays, system status LEDs, sturdy electrical box enclosure, meets OSHA & UBC standards.

Macurco SS103 CO Fan Controller: Monitor 3 (SS103-3A) or 10 (SS103-10A) Remote Detectors

SS103 CO fan controller to monitor up to three (SS103-3A) or ten (SS103-10A) remote detectors. Adjustable alarm settings, three 10amp relays, system status LEDs, sturdy electrical box enclosure, meets OSHA & UBC standards.

Macurco DVP-120 Multigas Detection and Ventilation Control Panel

DVP-120 Multigas Detection and Ventilation Control Panel. Up to 12 analog sensor inputs, three 12amp output relays, Nema 1 enclosure, Digital display shows sensor and system status. Meets OSHA & UBC standards.

Macurco DMK-1 Duct Mounting Enclosure (DMK1)

DMK-1 Duct mounting enclosure that allows all of our detectors to sample air in a duct. All mounting hardware, exhaust tube and mounting template included. 7" x 7 1/8" x 4 1/4"

System Sensor CO1224 Carbon Monoxide Delector: 12 VDC, 4-Wire

The C01224 is a 12/24 volt 4-wire Carbon Monoxide detector equipped with a sounder and a trouble relay. System Sensor's CO1224 provides early warning when its electrochemical sensing technology accurately measures carbon monoxide levels in the air.

Ultra Guard CODET12-24 Carbon Monoxide Alarm