DA-503 Drive-Alert Driveway Alarm
New Model - More Features and Easier to Install
The New DA-503 Drive-Alert Driveway Alarm system provides the same dependable method of vehicle detection as the DA-500. However, the DA-503 incorporates built-in X-10 transmitters that use a home's existing electrical wiring to transmit a signal which sounds chimes when a vehicle enters a driveway, or wherever a sensor has been buried. The once difficult and expensive task of hard wiring security sound into rooms and remote areas no longer exists.
The DA-503 can be ordered as a complete unit which includes a control panel, 1 DA-058 Remote Chime, and 1 sensor with 100 feet of cable. Any number of chimes may be used and longer lengths of cable are available. See our accessories section for details.
- Control panel
- DA-058 Remote Chime
- DA-051-100 Sensor with 100 ft. of cable
- Sensors with longer lengths of cable are available
Protecting the home
The Drive-Alert is a multi-purpose, solid-state electronic alarm system designed to detect vehicle traffic in driveways, farm lanes, intersections, and any areas where knowledge of vehicle movement is desired. The out-of-sight sensor detects moving metal objects in a nominal range of eight feet on either side of the sensor — and sends a signal to the master control unit, which sounds the chime.
Preventing theft
The sensor, when placed alongside a stationary metal object (such as campers, farm tractors, RVs, boats, or gasoline tanks) will detect any movement of that object and sound an alarm, aiding the prevention of theft and vandalism.
Drive-Up Window Applications
Restaurants, banks, pharmacies and other businesses that utilize drive-up windows can use the Drive-Alert unit to signal a customer’s arrival.
Enhancing safety
Industrial safety is improved by using the Drive-Alert unit at busy or blind intersections, helping to prevent accidents by signaling the movement of vehicular traffic in these areas. The DA-503 Drive Alert is mounted easily in any enclosed area with 120 VAC access. The sensor is buried 6" deep, parallel to the drive or area being protected. By a simple adjustment at the control box, the sensitivity of the sensor’s operating range can be changed.
Mier also offers various accessories for the DA-503 Drive-Alert unit, which can enhance the effectiveness and versatility of the system.
|
