DA-504 Drive-Alert Driveway Alarm
The New DA-504 Drive-Alert Driveway Alarm system provides the same dependable method of vehicle detection as the DA-500. However, the DA-504 incorporates built-in X-10 transmitters that use a home's existing electrical wiring to transmit a signal which sounds chimes and turns on lights when a vehicle enters a driveway, or wherever a sensor has been buried. The once difficult and expensive task of hard wiring security sound into rooms and remote areas no longer exists.
This model uses the same method of sounding a chime as the DA-503. Additionally, the DA-504 uses two methods of turning on lights; the DA-060 Lamp Module which any lamp can be plugged into, or the DA-059 Wall Switch which functions as a standard on/off switch AND receives an alarm signal which triggers the lights to turn on for a chosen period of time.
- Control panel
- DA-058 Remote Chime
- DA-051-100 Sensor with 100 ft. of cable
- Sensors with longer lengths of cable are available
- DA-059 Wall Switch or DA-060 Lamp Module
The DA-504 can be ordered as a complete unit which includes a control panel, 1 chime, 1 lamp module OR wall-switch, and 1 sensor with 100 feet of cable. Any number of chimes, lamp modules, or wall switches may be used, and longer lengths of cable are available. See our accessories section for details.
Protecting the home
The Drive-Alert is a multi-purpose, solid-state electronic alarm system designed to detect vehicle traffic in driveways, farm lanes, intersections, and any areas where knowledge of vehicle movement is desired. The out-of-sight sensor detects moving metal objects in a nominal range of eight feet on either side of the sensor — and sends a signal to the master control unit, which sounds the chime and turns on lights.
Preventing theft
The sensor, when placed alongside a stationary metal object (such as campers, farm tractors, RVs, boats, or gasoline tanks) will detect any movement of that object and sound an alarm, aiding the prevention of theft and vandalism.
Drive-Up Window Applications
Restaurants, banks, pharmacies and other businesses that utilize drive-up windows can use the Drive-Alert unit to signal a customer’s arrival.
Enhancing safety
Industrial safety is improved by using the Drive-Alert unit at busy or blind intersections, helping to prevent accidents by signaling the movement of vehicular traffic in these areas. The DA-504 Drive Alert is mounted easily in any enclosed area with 120 VAC access. The sensor is buried 6" deep, parallel to the drive or area being protected. By a simple adjustment at the control box, the sensitivity of the sensor’s operating range can be changed.
Mier also offers various accessories for the DA-504 Drive-Alert unit, which can enhance the effectiveness and versatility of the system.
|
