Doorking 1812-081 Residential Intercom: Surface Mount, Stainless Steel
The industry standard for residential access control. This unit uses your existing phone line, no additional phone line is required.
Residential telephone intercom system does not require dedicated central office phone line. Has built in time clock, time zones, call waiting, forwarding, and can dial out pre programmed numbers. Includes 24 volt, 20 VA plug-in transformer and by-pass switch. Can be surface or flush mounted.
Features
- Does not require another dedicated phone line.
- Up to three outside phone numbers can be programmed
- Built-in time clock for time zones and call restriction features
- Do Not Disturb time zone feature
- Call waiting feature ensures you will never miss a call
- Call forwarding sends entry system calls to pre-programmed phone number
- "Flash" and standard entry codes
- Models available in stainless steel and 24K gold plated
- 2 year limited warranty
Specifications
| Communication: | Full duplex hands free |
| Input Power: | 24 VAC, 60 Hz - 20 VA transformer provided |
| Current Draw: | 250 ma. |
| Operating Temperature: | -10 degrees F to 145 degrees F (-24 degrees C to 62 degrees C) |
| Time Clock: | Internal, 7 day programmable |
| Double/Standard Ring: | Call from entry system (2 short rings) - Incoming phone call (standard long ring) |
| Programming: | Program from system keypad, from house phone, remotely from outside |
Intercom Mode:
| System can be programmed for intercom mode and connected to an unused C.O. port on a PBX or KSU system |
Bypass Switch:
| System bypass switch allows house phones to be switched directly to C.O. linein case of power outage or system malfunction |
| Output: | Two dry contact relays |
| Preprogrammed Numbers: | Up to 3 phone numbers |
Relay Functions:
(Touch Tone Phones Only) | Momentary contact, latch relay, un-latch relay, latch for one hour
|
Entry Code Functions:
| 14 each relay - momentary contact
1 each relay - Flash codes
5 each relay - latch relay
5 each relay - time zone restriction |
| FCC Registration: | DUF6VT-12874-OT-0 |
| DOC Registration: | 1736 4507 A |
| Ringer Equivalence: | 0.0 A. |
| Jack Type: | RJ11 C or W |
| Surface Mount Dimensions: | 6 1/8" high, 10" wide, 5 1/4" deep @ top, 3" deep @ bottom |
| Flush Mount Dimensions: | 7 1/4" high, 11" wide (Face plate). 6 1/8" high, 10" wide, 3" deep (box). |
| Flush Mount Box Dimensions: | 6 1/2" high, 10 1/4" wide, 3 1/8" deep (Rough in box requirements) |
| Decorative Stainless Steel and 24K Gold Plating: | Models are available with stainless steel or 24K gold plated face plates and housings |
| Shipping Weight: | Approximately 14 pounds |
| Warranty: | Two year factory to dealer limited warranty |
|
|
|
|
| |
 |
|
|
