ELK Products ELK-M1XRF2G Crystal Wireless Receiver for M1Gold and M1EZ8 Controls

Description

The ELK-M1XRF2G is a Wireless (RF) Receiver and Input Expander for use with the ELK-M1 and ELK-M1EZ8 Controls. The receiver connects to the four (4) wire data (keypad) bus of the control and integrates in much the same way as a M1XIN hardware zone expander except that a single M1XRF can handle up to 144 wireless zones (e.g. transmitter sensors or points).

The M1XRF2G receiver uses Crystal frequency technology and is a dual (2) antenna, phase diversity design, capable of long range wireless coverage.

The M1XRF2G is ONLY compatible with the 319.5MHz Crystal based transmitters available from GE.

Features

• Adds up to 144 individual wireless zones (sensors/points)
• Operates from the 4 wire RS485 Data Bus
• Additional Receivers (up to 11) may be Connected to a single M1 or M1EZ8 Control for redundancy or greater coverage
• Flash Memory for Updating of operating Firmware

Specifications

• Sensitivity: >105 dbm
• Operating Temperature: 0 to +120 degrees F
• Operating Voltage: 12 Volts D.C.
• Current Draw: 70mA
• Range: 300 to 500 ft. line of sight (Up to 1000 ft. with ground plane antennas)

NOTE: Walls or metal may reduce actual operating range.

View the ELK-M1XRF2G Instruction Manual in Adobe Acrobat format (right-click to save document to your hard drive).