The ELK-M1KAM is designed for access control. It is a single door access interface module for use on the M1 and M1EZ8 Control Panels. The M1KAM connects to the 4 wire keypad data bus in place of a traditional M1 Keypad.
Allows a proximity card or fob to be used with the M1 Keypad to quickly arm, disarm, operate a door strike, etc. Plugs into back of the Keypad. Uses M1PRC cards or M1PRF fobs.
The Elk UltraProx Weigand Reader is a compact, technically advanced external proximity reader with 26 bit Weigand output for use with a separate controller. Compatible with Elk M1 control panels and most other access controllers. Ideal for higher security installations and as an alternative to remembering PIN codes.
For use with the ELK-M1 Security, Automation & Phone Control System. The ELK-W035A 5-pin cable is required for connecting the wireless receivers (models NX408E, 416E, or 448E) to the M1 or M1G Control. It can also be used to connect another manufacturer’s proximity reader (26bit Weigand format) to a M1KP keypad. Wire Length = 18”
The Elk M1PRC Proximity Card allows gate, house or building entry without the need to input to a keypad. Requiring a personal access code to gain entry to a building or a gate does add security but if the code becomes public, anyone can use it to gain access. The Elk M1PRC Proximity Card is designed to be used in conjunction with an Elk M1PR Mini Proximity Reader that is installed internally in an Elk M1 LCD Keypad and are read in a highly secure, 26 bit Weigand format.
The Elk M1PRF Key Fob allows gate, house or building entry without the need to input to a keypad. Requiring a personal access code to gain entry to a building or a gate does add security but if the code becomes public, anyone can use it to gain access.
