Wireless expansion is an attractive option for anyone wanting to add an M1 system to an existing home or expand an M1 system that is already installed. Wireless sensors can be installed throughout the home with ease and without the mess. Adding wireless to the M1 can also provide convenient remote control of the system using wireless keyfobs.
Receivers: ELK Products
The ELK-M1GOLD and ELK-M1EZ8 support the following wireless receiver manufactured by Elk Products.
ELK Products ELK-M1XRF2G Crystal Wireless Receiver for M1Gold and M1EZ8 Controls
Description
The ELK-M1XRF2G is a Wireless (RF) Receiver and Input Expander for use with the ELK-M1 and ELK-M1EZ8 Controls. The receiver connects to the four (4) wire data (keypad) bus of the control and integrates in much the same way as a M1XIN hardware zone expander except that a single M1XRF can handle up to 144 wireless zones (e.g. transmitter sensors or points).
For use with the ELK-M1 Security, Automation & Phone Control System. The ELK-W035A 5-pin cable is required for connecting the wireless receivers (models NX408E, 416E, or 448E) to the M1 or M1G Control. It can also be used to connect another manufacturer’s proximity reader (26bit Weigand format) to a M1KP keypad. Wire Length = 18”
Both the ELK-M1XRF2G and NX548E receivers support Caddx and ITI transmitters*. This includes a variety of sensors including door/window sensors, motion sensors, glass break detectors, carbon monoxide detectors, smoke detectors, water and freeze detectors, etc.
*The M1XRF2G is ONLY compatible with the 319.5MHz Crystal based transmitters available from GE.
The Caddx Wireless Receivers also support wireless keyfobs. These keyfobs provide a convenient way to arm and disarm the security system. The keyfob can also be programmed to open/close the garage door, turn on exterior lighting, etc.
NX-656 Series Glass Guard Sensors from GE Interlogix
NX-656, NX-657 Glass Guard Sensor
The Glass Guard glassbreak sensor mounts directly on glass, making it perfect
for homes with big picture windows and for businesses with large storefront
glass.
NX-491T Wireless ESL Smoke Detector from GE Interlogix
ESL battery operated photoelectric smoke detectors come in a
variety of models for different applications. ESL offers both
supervised wireless models and stand-alone models.
The supervised wireless models are available in two types. The
residential supervised models can be used with Caddx and ITI
panels that support wireless devices and the commercial
supervised wireless models can be used with Advent panels. All
the supervised wireless models ship with batteries and ITI
transmitters included, plus feature Learn Mode technology..
The stand-alone models can be shipped with batteries for use as
non-system smoke detectors for use in various applications where
an end-user chooses not to install a monitored smoke detector.
Additionally, other manufacturers with proprietary transmitters
and systems can use the stand-alone models when appropriately
listed with UL.
GE Security NX-695 Wireless Flood / Water Leak Detector
The Caddx NX-695 water sensor spares you the headaches of water leaks that go undetected for hours and even days. The sensor sounds an environmental alarm when it detects water.
Use door/window sensors to protect anything that opens and closes, such as doors, windows, jewelry cases, and gun cabinets. The sensor detects intrusion with a magnet and reed-switch mechanism that signals an alarm during unauthorized entry.
Use door/window sensors to protect anything that opens and closes, such as doors, windows, jewelry cases, and gun cabinets. The sensor detects intrusion with a magnet and reed-switch mechanism that signals an alarm during unauthorized entry.
Created to meet consumer demand for less conspicuous security sensors, the Micro is the smallest sensor of its kind in the security industry. The wireless Micro, for residential and commercial intrusion detection, is only 1.75" long by .875" wide by .5" high--or 84% smaller than standard door/window security sensors.
Created to meet consumer demand for less conspicuous security sensors, the Micro is the smallest sensor of its kind in the security industry. The wireless Micro, for residential and commercial intrusion detection, is only 1.75" long by .875" wide by .5" high--or 84% smaller than standard door/window security sensors.
Wireless flexibility allows door/windows protection even where the sensor must be totally concealed. The sensor is placed in the door frame and the magnet is located in the door.
Wireless flexibility allows door/windows protection even where the sensor must be totally concealed. The sensor is placed in the door frame and the magnet is located in the door.
GE Security 60-873-95 Shatterpro Glass Break Sensor (NX-488)
The Wireless ShatterPro™ Series provides excellent false alarm immunity without compromising detection. It is ideal for applications where hard wired acoustic sensors are impractical.
Passive Infrared (PIR) Motion Sensor
Part no: 60-511-01-95
The DS 924 motion sensor with ITI transmitter motion sensor detects infrared energy given off by persons in a secured area. An alarm is signaled only when the sensor is armed and the viewed energy has the correct temperature, motion, and timing associated with an intruder, thus safeguarding against false alarms. The sensor uses fresnel lenses to provide a choice of seven different coverage patterns, including a pattern to protect against activation by pets.
Photoelectric smoke detector with field replaceable optic chamber and
CleanMe™ self-diagnostics feature. Includes fixed temperature
rate-of-rise heat detector. Built-in sounder. Tamper switch. Lithium
batteries included. 6.5 year battery life.
The ELK-WO35A wiring harness allows the connection of a Caddx wireless receiver to the M1 Control.
