ELK-M1G Gold Home Automation System 4

• ELK M1G Gold Controller
• Power Transformer
• ELK-M1KP Custom English LCD Keypad
• ELK-1270 12-Volt, 8AH Backup Battery
• ELK Siren Speaker
• RJ31X Telephone Jack & Cord

ELK-M1GK Gold Home Automation System

• ELK M1G Gold Controller
• Power Transformer
• ELK-M1KP Custom English LCD Keypad
• ELK-1270 12-Volt, 8AH Backup Battery
• ELK Siren Speaker
• RJ31X Telephone Jack & Cord

ELK-M1G Gold Home Automation System 4

• ELK M1G Gold Controller
• Power Transformer
• ELK-M1KP Custom English LCD Keypad
• ELK-1270 12-Volt, 8AH Backup Battery
• ELK Siren Speaker
• RJ31X Telephone Jack & Cord

ELK-M1G Gold Home Automation System 4

• ELK M1G Gold Controller
• Power Transformer
• ELK-M1KP Custom English LCD Keypad
• ELK-1270 12-Volt, 8AH Backup Battery
• ELK Siren Speaker
• RJ31X Telephone Jack & Cord

• Backlit, Large Character LCD Display: 16 x 2 lines
  
• Built-in Temperature Sensor
  
• Optional Plug-in Prox Access reader (26 bit Weigand format)
  
• Menu navigation keys and 6 programmable function keys
  
• Plug-in connector: Only 4 wires to the control
  
• 1 Zone Input and 1 Output Programmable per Keypad
  
• Programmable display of time, date and temperature
  
• Displays system diagnostics and settings

Elk Products ELK-M1KP2 Low Profile, Blue Keypad for M1 Series Controls

The ELK-M1KP2 is a low profile, addressable LCD Keypad for the M1 family of Cross Platform Controls. It features a 32 character blue/white backlighted display, blue lighted keys, 4 programmable function keys, along with the ELK menu navigation keys. It may also be recess ’flush’ mounted using with a separately purchased back box kit (ELK-M1BBK2).

M1 LCD Keypad Control Your System From Up To 16 On Site Locations

The ELK-M1KP3 is an addressable, surface mount LCD Keypad for the M1 family of Cross Platform Controls®. It features a 32 character blue/white backlighted display, blue lighted keys, 4 programmable function keys, along with the ELK menu navigation keys. The M1KP3 is compatible with "external" 26 bit Wiegand compatible proximity readers, allowing cards or fobs to be used for arming, disarming, or limited door strike control, etc. It features a hinged door over the keys.

ELK-M1KPAS M1 Arming Station

Small, economical, arm/disarm station for M1 Controls which fits into single gang box and utilizes a standard decorator style faceplate (not included). Particularly well suited for partitioned jobs such as an office, workshop, garage, etc., but can also be used as the main keypad for any installation. Displays basic system status with 3 LEDs: Green "Ready", Yellow "Trouble", and Red "Armed". The 12 button keypad is backlit with blue LEDs and has quick arm keys for "EXIT" and "STAY". The M1KPAS also provides access to six (6) programmable function operations by pressing the "F" key followed by the number key (1-6) within 5 seconds.

ELK-TS07 7" Touchscreen: Total Control at Your Fingertips

The ELK-TS07 is a 7" touchscreen that operates with M1 or EZ8 controls. It features a bright TFT display, powerful microprocessor, and built-in ElkRM Remote Management Software to satisfy the most discriminating taste. The easy to use graphical interface is designed to simplify the operation of both automation and security.

ELK-M1XIN M1 16 Zone Input Expander

ELK-M1XOV M1 16 Output Expander, Flying Voltage Leads

Adds 16 voltage outputs to M1 or M1G Control. Provides 2 plug-in, 8-pin flying lead connectors for triggering low current devices (50 mA max. each such as: LEDs, relays, piezos, etc. Operates from 4-wire data bus. Up to 12 Output Expanders may be used for a total of 208 outputs. The voltage outputs can be converted to relays (8 or 16) using (1 or 2) M1RB Relay Board(s).

ELK-M1XOVR 16 Output expander, 8 Voltage/8 Relays

Adds 16 outputs (8 voltage, 8 relays) to M1 or M1G Control. Voltages can be used to trigger low current devices (50 mA max. each). Relays are SPDT rated for 7A @ 30 VDC, 10A @ 125 VAC. Operates from 4-wire data bus. Up to 12 output expanders may be used for a total of 208 outputs. Option: Convert 8 voltage outputs to relays using M1RB Relay Board.

ELK-IP232 Serial to Ethernet Converter

The ELK-IP232 is an Ethernet to RS-232 Serial Port Bridge. It allows bi-directional communication between the two. It operates as a network server, which means it does not initiate network connections, but rather, accepts them. Once a network connection is accepted, the remote networked device or computer is virtually connected to the serial device on the other side of the Bridge. Both the network device and the serial device can send and receive messages to and from each other. Up to twelve network devices may be connected simultaneously. Data sent from any one of them is bridged to the serial port. Data received on the serial side is transmitted to all connected network devices.

ELK-M1DBH M1 Data Bus Hub

For easy connection of expanders & keypads. The M1DBH accepts up to 9, RJ45 equipped CAT5 or CAT6 cables, and series connects the data A & B lines so the data bus may be terminated properly. Two or more units may be interconnected if more than 9 data lines are required.

ELK Products ElkRM Remote Management Software

ElkRM PC Edition Remote Management software runs as an executable program on virtually any personal computer or Pocket PC running the Microsoft .NET Framework 2.0.

ELK-M1XSP Lighting/Thermostat Interface, Serial Port Expander

This is a "3 in 1" product. As a lighting interface, it adapts the M1 Control to many brands of Lighting control products which use "serial" communications. i.e.,OnQ-ALC, PCS-UPB, EDT, CENTRALITE, VANTAGE, etc. As a thermostat interface, it adapts the M1 Control to HVAC Communicating Thermostats from companies such as:RCS, APRILAIRE, and HAI. As a serial port expander, it expands the RS-232 communication ports of the M1 for multiple connections to most any type of equipment that communicates using serial ASCII commands. i.e., Personal Computers and high end whole house subsystems such as: CRESTRON, AMX, etc. Jumpers on the M1XSP select the appropriate application, connection, and protocol. Best of all, the M1XSP operates from the 4-wire (RS-485) M1 Keypad data bus, allowing RS-232 ports to be located long distances from the control. The M1G (Gold) Cross Platform Control supports up to 7 M1XSPs while the M1 (Std) supports 1 M1XSP. The communications baud rate is adjustable from 300 to 38,400 baud. The unit comes complete with cable and a black surface mountable housing.

ELK-M1KAM M1 Single Door Access Module

The ELK-M1KAM is designed for access control. It is a single door access interface module for use on the M1 and M1EZ8 Control Panels. The M1KAM connects to the 4 wire keypad data bus in place of a traditional M1 Keypad.

ELK-M1PR Keypad Plug-in Proximity Reader

Allows a proximity card or fob to be used with the M1 Keypad to quickly arm, disarm, operate a door strike, etc. Plugs into back of the Keypad. Uses M1PRC cards or M1PRF fobs.

ELK-M1PRC Proximity Access Cards (10-pack)

The Elk M1PRC Proximity Card allows gate, house or building entry without the need to input to a keypad. Requiring a personal access code to gain entry to a building or a gate does add security but if the code becomes public, anyone can use it to gain access. The Elk M1PRC Proximity Card is designed to be used in conjunction with an Elk M1PR Mini Proximity Reader that is installed internally in an Elk M1 LCD Keypad and are read in a highly secure, 26 bit Weigand format.

ELK-M1PRF Proximity Key Fobs (10-pack)

The Elk M1PRF Key Fob allows gate, house or building entry without the need to input to a keypad. Requiring a personal access code to gain entry to a building or a gate does add security but if the code becomes public, anyone can use it to gain access.

ELK Products ELK-106055 UltraProx Weigand Reader

The Elk UltraProx Weigand Reader is a compact, technically advanced external proximity reader with 26 bit Weigand output for use with a separate controller. Compatible with Elk M1 control panels and most other access controllers. Ideal for higher security installations and as an alternative to remembering PIN codes.

WO35A M1 Accessory Wire Harness

For use with the ELK-M1 Security, Automation & Phone Control System. The ELK-W035A 5-pin cable is required for connecting the wireless receivers (models NX408E, 416E, or 448E) to the M1 or M1G Control. It can also be used to connect another manufacturer’s proximity reader (26bit Weigand format) to a M1KP keypad. Wire Length = 18”

ELK Products ELK-WO39A Cable to connect external prox to M1KP2

ELK Products ELK-M1TWK Two Way Listen-In Kit for ELK-M1Gold

Complete kit for two-way communication. Includes two-way interface, ELK-M1TWI, plus a two-way speaker/microphone, ELK-M1TWS.

ELK Products ELK-M1TWI Two Way Listen-In Interface For ELK-M1Gold

Adds up to three (3) zones of two way listen-in to M1 Gold Control. This can be used by the Central Station to verify an alarm, or by a user from the telephone remote control to check on elderly parents, children, etc. Up to 12 microphones (M1TWS) may be connected.

ELK Products ELK-M1TWS M1 Two Way Speaker/Microphone

Microphone and 20 Watt Speaker combination for use with the ELK-M1TWI and ELK-M1EZ8TWI Two Way Listen-in interfaces. Requires 4 conductor cable. Up to 12 may be connected.

ELK Products ELK-M1TWM M1 Two Way Microphone

Microphone only for use with the ELK-M1TWI or ELK-M1EZ8TWI two way listen-in interface. Up to 12 microphones total may be connected.

ELK-M1XZW Z-Wave Enabled Device Controller

The ELK-M1XZW is a radio transceiver interface designed to allow an M1 Controller to interface with Z-Wave enabled devices. Z-Wave technology is a wireless bi-directional communications network consisting of devices such as: Plug-in Dimmer Modules, Wall Mount Switches and Dimmers, Plug-in Appliance Modules, Motion/Occupancy Sensors, and HVAC Thermostats

ELK Products ELK-M1ZTS M1 Zone Temperature Interface with Sensor: Includes Short Probe

Monitor high or low temperatures with this add-on remote sensor. Connects to any main zone on the M1 Gold (1-16) or M1EZ8 (1-8). Range is -50 to +140F. Applications include: freeze monitoring, second homes, agricultural uses, etc. Temperature may be accessed from keypad, telephone remote control, or rules.

ELK Products ELK-M1ZTSR M1 Zone Temperature Interface with Sensor: Includes Short Probe

Monitor high or low temperatures with this add-on remote sensor. Connects to any main zone on the M1 Gold (1-16) or M1EZ8 (1-8). Range is -50 to +140F. Applications include: freeze monitoring, second homes, agricultural uses, etc. Temperature may be accessed from keypad, telephone remote control, or rules.

ELK Products ELK-M1BBK2 Back box for flush mounting M1KP2

HAI Omnistat RC-100B

Omnistat thermostats feature a sleek, modern case design that blends in with any décor. The large LCD display with "cool blue" LCD backlight shows time, temperature and operational mode.

PSC05 X-10 Pro® Two Way Powerline Interface Module

Send and receive X10 signals via the AC power line. Converts signals from a controller (i.e. ELK Magic Module MM443) into X-10 transmissions to the power line. The PSC05 also reports X10 signals back to the controller received from the power line.

Paradox DG-75 High-Security Digital Motion Detector with Pet Immunity

• Extremely reliable and false-alarm free
• Dual optics (2 dual opposed element sensors)
• Provides superior pet immunity using a patented combination of advanced optics and digital processing technologies
• Immune to pets weighing up to 40kg (90lbs)
• Digital Dual Opposed Detection (see page 7)
• 11m (35ft) X 11m (35ft); 90º viewing angle
• Features and specifications common to all digital motion detectors

The PetSmart NEXTDUOK Pet-Immune Dual Technology Detector: 80 lbs (K-980D) PIR/Microwave dual technology detector is a state-of-the-art pet immune detector. It offers immunity to pets weighing up to 36 kg (80 lb) with 12 x 12 m (40 x 40 ft) coverage. It can be wall or corner mounted for residential and commercial applications and comes with an integral swivel bracket. The K-980D operates with Visonic Ltd's TMR™ - True Motion Recognition signal processing and has triple event count protection, advanced system diagnostics and microwave supervision. (VS-K980D)