Experience the Most Advanced Cross Platform Control
The M1 Controller family offers unequaled value to Systems Integrators, Installers and End Users alike. Unlike panels that may be strong in automation but weak in security (or vice versa), the M1 boasts a rock solid security foundation with the most imaginative and powerful automation functionality available.
Integrators and Installers will value the flash memory firmware, RS-232 serial port, ethernet connectivity option, fast PC programming and ease of installation resulting in reduced work time. M1 offers the flexibility to integrate industry standard systems and components for easy upgrades and system expansion.
End users will welcome the quality and futuristic capabilities of the versatile keypad and the built-in telephone remote. The 500+ word vocabulary pleasantly announces system status, configurable in any sequence to alleviate user intimidation.
M1...Experience the Industry's Most Advanced Cross Platform Control
Features & Benefits
Large zone capacity: 16 on-board zones expandable to 208
Wireless capability: Up to 48 zones
Two-way Listen-in interface
Flash Memory - Allows field updates to firmware electronically
RS-232 Serial Port to interface to computers and peripheral devices
Time/Date stamped 512 event history log
Menu driven, full text keypad programming - no manual required!
Voice Announcement of alarms, zone descriptions, status, etc.
- 500+ Word/phrase Vocabulary
- Link up to 6 words/phrases per announcement
- 10 custom recordable word/phrases
13 On-board Outputs: 1 voice/siren, 1 siren driver, 1 form "C" relay and 10 low current (50mA) outputs
Supports 4-wire (any zone) and 2-wire (zone 16) smoke detectors
Includes fire alarm verification routine
Can be partitioned into 8 separate areas and account numbers
User Codes: 99 (4 or 6 digit) with assignable authority levels
Arm levels: Away, Stay, Stay Instant, Nite, Nite Instant, Vacation
Plug-in terminal blocks make service and pre-wires a snap!
Hardware "watchdog" and nonvolatile EEPROM memory
Supervised phone line, alarm output and aux. overcurrent
Communications
True V.22 bis Modem for fast, reliable upload/download
Optional Ethernet port for reporting operation / control or programming
Built-in telephone remote control makes any phone a keypad
Integrated Voice Dialer uses vocabulary or custom word/phrases
Digital Communicator formats: SIA, Contact ID, 4+2 and Pager
Installer Telephone (butt set) test feature
Elk-RP PC software includes "conflict resolution" to easily highlight differences between control and PC
- Dial-up, ethernet or local from RS-232
port or house phone jack
- Automatic answering machine bypass
Keypad
Backlit, Large Character LCD Display: 16 x 2 lines
Built-in Temperature Sensor
Optional Plug-in Prox Access reader (26 bit Weigand format)
Menu navigation keys and 6 programmable function keys
Plug-in connector: Only 4 wires to the control
1 Zone Input and 1 Output Programmable per Keypad
Programmable display of time, date and temperature
Displays system diagnostics and settings
System supports up to 16 keypads
Automation & Integration
Create lifestyle enhancing comfort, convenience and security
Powerful "Whenever/And/Then" RULES Programming allows almost any imaginable operation.
- No need to chain rules together.
- Any single "Whenever" event can can have one or more ANDs and THENs (conditions and commands).
Rules utilize easy to understand text based references
Control lighting using RS-232 serial or 2-way Power Line Control (PLC) ports
- On, Off, Dim All On, All Off commands
Sunset/Sunrise calculation and activation
Transmit and receive custom serial ASCII messages
Read temperature sensors and communicate with thermostats
Turn on Tasks, Lights, Outputs via Keypad or Telephone Remote
Power Supply
Heavy Duty - 2.5 Amp power supply w/ 1.5 Amp continuous
Control your system from up to 16 on site locations. Elk's M1KP standard keypad is a powerful user interface with optional proximity reader for keylass entry and control. Our new TS07 is a 7" touchscreen for the ultimate in user friendly command and control of your M1 system.
ELK-TS07 7" Touchscreen: Total Control at Your Fingertips
The ELK-TS07 is a 7" touchscreen that operates with M1 or EZ8 controls. It features a bright TFT display, powerful microprocessor, and built-in ElkRM Remote Management Software to satisfy the most discriminating taste. The easy to use graphical interface is designed to simplify the operation of both automation and security.
For easy connection of expanders & keypads. The M1DBH accepts up to 9, RJ45 equipped CAT5 or CAT6 cables, and series connects the data A & B lines so the data bus may be terminated properly. Two or more units may be interconnected if more than 9 data lines are required.
Allows a proximity card or fob to be used with the M1 Keypad to quickly arm, disarm, operate a door strike, etc. Plugs into back of the Keypad. Uses M1PRC cards or M1PRF fobs.
The Elk M1PRC Proximity Card allows gate, house or building entry without the need to input to a keypad. Requiring a personal access code to gain entry to a building or a gate does add security but if the code becomes public, anyone can use it to gain access. The Elk M1PRC Proximity Card is designed to be used in conjunction with an Elk M1PR Mini Proximity Reader that is installed internally in an Elk M1 LCD Keypad and are read in a highly secure, 26 bit Weigand format.
The Elk M1PRF Key Fob allows gate, house or building entry without the need to input to a keypad. Requiring a personal access code to gain entry to a building or a gate does add security but if the code becomes public, anyone can use it to gain access.
Plug-in (8 form ”C” relays). May be plugged directly into an M1, M1G, M1XOV, or M1XOVR to convert the voltage outputs into SPDT relays rated for 7A @ 30 VDC, 10A @ 125 VAC.
ELK-M1XIN M1 16 Zone Input ExpanderAdds 16 hardwired zones (EOL resistor supervised) to the M1 or M1G Control. Operates from 4-wire data bus. Up to 12 of these can be used, increasing total zones (inputs) to 208.
ELK-M1XOV M1 16 Output Expander, Flying Voltage Leads
Adds 16 voltage outputs to M1 or M1G Control. Provides 2 plug-in, 8-pin flying lead connectors for triggering low current devices (50 mA max. each such as: LEDs, relays, piezos, etc. Operates from 4-wire data bus. Up to 12 Output Expanders may be used for a total of 208 outputs. The voltage outputs can be converted to relays (8 or 16) using (1 or 2) M1RB Relay Board(s).
Adds 16 outputs (8 voltage, 8 relays) to M1 or M1G Control. Voltages can be used to trigger low current devices (50 mA max. each). Relays are SPDT rated for 7A @ 30 VDC, 10A @ 125 VAC. Operates from 4-wire data bus. Up to 12 output expanders may be used for a total of 208 outputs. Option: Convert 8 voltage outputs to relays using M1RB Relay Board.
ELK Products ELK-M1ZTS M1 Zone Temperature Interface with Sensor: Includes Short Probe
Monitor high or low temperatures with this add-on remote sensor. Connects to any main zone on the M1 Gold (1-16) or M1EZ8 (1-8). Range is -50 to +140F. Applications include: freeze monitoring, second homes, agricultural uses, etc. Temperature may be accessed from keypad, telephone remote control, or rules.
ELK Products ELK-M1ZTSR M1 Zone Temperature Interface with Sensor: Includes Short Probe
Monitor high or low temperatures with this add-on remote sensor. Connects to any main zone on the M1 Gold (1-16) or M1EZ8 (1-8). Range is -50 to +140F. Applications include: freeze monitoring, second homes, agricultural uses, etc. Temperature may be accessed from keypad, telephone remote control, or rules.
ELK Products ELK-M1TWI Two Way Listen-In Interface For ELK-M1Gold
Adds up to three (3) zones of two way listen-in to M1 Gold Control. This can be used by the Central Station to verify an alarm, or by a user from the telephone remote control to check on elderly parents, children, etc. Up to 12 microphones (M1TWS) may be connected.
ELK Products ELK-M1TWS M1 Two Way Speaker/Microphone
Microphone and 20 Watt Speaker combination for use with the ELK-M1TWI and ELK-M1EZ8TWI Two Way Listen-in interfaces. Requires 4 conductor cable. Up to 12 may be connected.
Control home or business from a PC browser, anywhere!
M1 VIRTUAL KEYPAD:
The ELK-M1XEP is an Ethernet Device Server with a RS-232 Serial Port Interface. It may be used to connect a Control in the M1 Family to an Ethernet network using TCP-IP protocol for programming, remote control and monitoring. It features a secure embedded web server, with a user interface built on a Java applet, and email event notification. A software setup utility is built into ElkRP (version 1.5.0 or later) for configuring the connection setup, network password, etc. The M1XEP is factory defaulted to obtain a dynamic IP address from a DHCP server (i.e. Ethernet switch, cable modem, etc.), however it may also be setup with a static IP address.
ELK-M1XSP Lighting/Thermostat Interface, Serial Port Expander
This is a "3 in 1" product. As a lighting interface, it adapts the M1 Control to many brands of Lighting control products which use "serial" communications. i.e.,OnQ-ALC, PCS-UPB, EDT, CENTRALITE, VANTAGE, etc. As a thermostat interface, it adapts the M1 Control to HVAC Communicating Thermostats from companies such as:RCS, APRILAIRE, and HAI. As a serial port expander, it expands the RS-232 communication ports of the M1 for multiple connections to most any type of equipment that communicates using serial ASCII commands. i.e., Personal Computers and high end whole house subsystems such as: CRESTRON, AMX, etc. Jumpers on the M1XSP select the appropriate application, connection, and protocol. Best of all, the M1XSP operates from the 4-wire (RS-485) M1 Keypad data bus, allowing RS-232 ports to be located long distances from the control. The M1G (Gold) Cross Platform Control supports up to 7 M1XSPs while the M1 (Std) supports 1 M1XSP. The communications baud rate is adjustable from 300 to 38,400 baud. The unit comes complete with cable and a black surface mountable housing.
The ELK-M1XZW is a radio transceiver interface designed to allow an M1 Controller to interface with Z-Wave enabled devices. Z-Wave technology is a wireless bi-directional communications network consisting of devices such as: Plug-in Dimmer Modules, Wall Mount Switches and Dimmers, Plug-in Appliance Modules, Motion/Occupancy Sensors, and HVAC Thermostats
Note: In addition to wireless, the ELK M1G system is compatible with all of our hard-wired sensors and detectors. Please refer to "Sensors & Detectors" in the main menu for details.
NX-656 Series Glass Guard Sensors from GE Interlogix
NX-656, NX-657 Glass Guard Sensor
The Glass Guard glassbreak sensor mounts directly on glass, making it perfect
for homes with big picture windows and for businesses with large storefront
glass.
NX-491T Wireless ESL Smoke Detector from GE Interlogix
ESL battery operated photoelectric smoke detectors come in a
variety of models for different applications. ESL offers both
supervised wireless models and stand-alone models.
The supervised wireless models are available in two types. The
residential supervised models can be used with Caddx and ITI
panels that support wireless devices and the commercial
supervised wireless models can be used with Advent panels. All
the supervised wireless models ship with batteries and ITI
transmitters included, plus feature Learn Mode technology..
The stand-alone models can be shipped with batteries for use as
non-system smoke detectors for use in various applications where
an end-user chooses not to install a monitored smoke detector.
Additionally, other manufacturers with proprietary transmitters
and systems can use the stand-alone models when appropriately
listed with UL.
GE Security NX-695 Wireless Flood / Water Leak Detector
The Caddx NX-695 water sensor spares you the headaches of water leaks that go undetected for hours and even days. The sensor sounds an environmental alarm when it detects water.
GE Security 4 Button Keyfob Transmitter from GE Interlogix
These small, powerful touchpads provide convenient portable control over security system, lights, panic, and garage door functions of your security system. Features: Light control capability, Auxiliary panic button, Key chain ring included, Specifications, Color: Black Dimensions: 1.4" wide, 2.25" high, .38" deep Battery: 12 VDC, 33 mAh alkaline battery (included) Battery life: 5-8 years Operating temp: 10°-120°F
GE Security Pendant Panic Button from GE Interlogix
Designed to go just about anywhere, this sensor allows you to activate a 24-hour emergency alarm whether your at home, in the yard, or in the shower. Features: Water and shock resistant. Recessed panic button prevents false alarms Can be worn around neck. Built-in belt clip allows sensor to be attached to belt or purse. Specifications: Necklace cord (included), belt clip (included), and wall mounting (bracket sold separately) Color: White Dimensions: 1.75" wide, 2.25" high, .75" deep Batteries: 3.5 VDC 1/2 AA Lithium Battery.
Control your system from up to 16 on site locations. Elk's M1KP standard keypad is a powerful user interface with optional proximity reader for keylass entry and control. Our new TS07 is a 7" touchscreen for the ultimate in user friendly command and control of your M1 system.
