The ELK-150RT is a self-contained Siren in a tampered "No Rust" stainless steel enclosure. It features two sealed reed tamper switches, one on the Back plate and one on the Front Cover. The switches are normally closed and pre-wired in series. The ELK-150RT can produce two distinct sounds from a single input trigger. The stainless steel exterior reflects the color of the mounting surface allowing the ELK-150RT to blend easily with any residential or commercial building.
The ELK-45 is a loud self-contained electronic siren in a compact and attractive housing. This siren draws less current than many competitive units and features the ability to produce two distinct sounds from a single input trigger. The ComboTrigger™ option allows controls which have a single alarm output and pulsing option to activate both the burglar and fire alarm sounds.
The ELK-55 Self-Contained Voice "Talking" Siren offers high quality pre-recorded voice messages along with loud siren sounds. It features two input channels, bilingual voices (English and Spanish), and many unique options which allow it to be used with virtually any residential or commercial alarm installation. The voice messages and the siren alternately sound whenever one of the channels is activated.
The ELK-71 is a Two-Tone (Yelp & Steady) Siren mounted in an attractive surface mount plastic enclosure. This versatile Echo™ Series siren is designed to be heard but not seen!. Sound "echoes" off mounting surface from back plate edge.
This unique contemporary siren has a smooth, paintable, "no grill" surface that easily blends with any decor. This siren mounts to any flat surface or single gang electrical "J" box. Also available is the ELK-74, a compact version of the ELK-71.
The ELK-74 is a Two-Tone (Yelp & Steady) Siren mounted in an attractive surface mount plastic enclosure. This versatile Echo™ Series siren is designed to be heard but not seen!. Sound "echoes" off mounting surface from back plate edge.
The ELK-75 is a self-contained Voice "Talking" Siren mounted in an attractive surface mount plastic enclosure. It produces high quality pre-recorded voice messages along with loud siren sounds. It features two input channels, bilingual voices (English and Spanish), and many unique options which allow it to be used with virtually any residential or commercial alarm installation. The voice messages and the siren alternately sound whenever one of the channels are activated.
The ELK-1RT is a rugged 30 Watt, 8 Ohm speaker mounted in a tamper resistant, "No Rust" enclosure. It features two sealed reed tamper switches, one on the Back plate and one on the Front Cover. The stainless steel naturally reflects the mounting surface and blends easily with any residential or commercial building. Also available is the ELK-150RT with Built-in Siren or the ELK-SL1 Strobe Light that can be added to the enclosure.
The ELK-44 is a universal 30 Watt - 8 Ohm Speaker which may be
connected to any siren driver or amplifier. It features a heavy
duty voice coil and magnet, allowing it to withstand up to 50
Watts of peak power.
The ELK-73 is a 20 Watt, 8 Ohm Speaker mounted in an attractive
surface mount plastic enclosure. This versatile Echo™ Series
speaker is designed to be heard but not seen!. Sound "echoes"
off mounting surface from back plate edge.
The ELK-870 is a self amplified interior speaker mounted in an attractive
surface mount plastic enclosure. It may be connected to virtually any audio
source, ie: microphone, radio, computer sound card, telephone system paging
output, etc., even an ordinary single line phone set. The audio source is
amplified up to 10 watts, adjustable from an on-board volume control.
ELK-SP12F is a flush mount, interior speaker. It is ideal for alarm or voice applications and flush mounts for a clean, designer look. Installers will applaud the easy installation, utilizing standard, single gang electrical boxes.
• High Fidelity Voice Coil
• Pre-Wired For Easy Installation
• Ideal for Alarm Systems or Paging
• Interior or Exterior use
• Lifetime Limited Warranty
The ELK-124 v.2 is a new and enhanced 8 channel recordable
voice module. It’s ideal for applications such as telephone
on-hold announcements, security and access control warnings,
museum narrations, and more.
The ELK-129 Computer Sound Card Interface allows a computer's
speaker output to be used as one of the tools for programming
sounds into the ELK Recordable Modules, such as the ELK-120,
ELK-124, or ELK-MV480. Includes software to download your
computer's audio files (WAVs) to the Recordable Modules.
The ELK-800 is a great compact audio amplifier It may be connected to virtually any audio source, i.e. microphone, radio, computer sound card, telephone system paging output, etc., even an ordinary single line phone set. The audio source is amplified up to 10 watts, adjustable from an on-board volume control. Remotely installed, it saves money by requiring only 22 - 24 gauge telco or alarm type wire. It operates on 12 -24 volts AC or DC and has built in volume adjust. It can also drive multiple speakers.
Adjustable volume control and 24 watt audio output make the
module suitable for applications ranging from security to
talking sales demonstrations. The channels can be configured
to play once or to repeat endlessly. The optional ELK-129
Computer Interface may be used to download recorded sounds
(.WAV files) from a personal computer to the Voice Module.
The ELK-WK1 is a an optional wall mount kit for use with the ELK-SL1
Strobe Light. The kit features a decorative snap-on trim cover with
all hardware for mounting the strobe to any flat surface or directly
to a single or double gang electrical box.
