60-562-04 Advent Commercial 132-Zone Burglary System Control Panel

The Advent Commercial Burglary system delivers advanced hardwire/wireless burglary protection for both new and existing commercial burglary alarm installations. The system is easy to install and simple to use. The system is available in two models:

• 60-562-01 has 250 zones, 8 partitions, and up to 250 users
• 60-562-04 has 132 zones, 4 partitions, and up to 100 users

The Advent Commercial Burglary system is suited for large applications or where future expansion may be required.

High Standards

The panel comes standard with 6 general purpose inputs/outputs, one 2 wire smoke loop (12 or 24 volt) and one additional general purpose input zone. Advent auxiliary power output provides 5 amps @ 12 VDC for power to bus devices and other system peripherals. All system events are stored in a 2,048-event history buffer.

Easy Expansion

Optional SnapCards™ add system input and output capabilities. SnapCards (two per panel) connect easily to the panel circuit board inside the cabinet for a clutter-free, professional installation. Optional SuperBus® 2000 modules add even more system input and output capabilities, such as dual phone line capability, 4-relay output, on-site printer, RF transceiver, and more.

Effortless Programming

Conduct quick and easy on-site programming with alphanumeric touchpads and a menudriven text interface. Or use Advent Downloader software.

Standard Features

• Six general purpose inputs/outputs, one additional general purpose input zone, one 2 wire smoke loop (12 or 24 volt)
• Supports up to 132 or 250 (depending on model) supervised, hardwire or wireless zones
• 78 pre-defined zone configuration types
• 4 or 8 (depending on model) partitions – two account numbers per partition; 32 shared schedules per partition
• 100 or 250 (depending on model) user-programmable access codes (4-6 digit lengths allowed)
• One supervised voice status/alarm output; One dry contact relay output
• 800+ word vocabulary for voice and display
• 12 VDC, 5 amp auxiliary power output
• On- and off-site telephone access with digitized-voice feedback
• Dual SuperBus Ports – support up to 62 bus devices (31 per port)
• 2,048 event buffer with time and date stamp, can be uploaded
• Contact ID™reporting format
• Up to 16 alphanumeric pagers
• Long Range Radio (LORRA); pre-programmed, on-board header
• Network buddy system
• Programming can be downloaded using ITI Advent Downloader
• Flash memory, downloadable upgrades

Expansion Options

• SuperBus 2000 RF Transceiver (up to 5) – works with all ITI crystal, wireless Learn Mode™ sensors and touchpads
• SuperBus 2000 Dual Phone Line Module
• SuperBus 2000 Printer Module
• SuperBus 2000 8-Zone Input Module
• SuperBus 2000 4-Relay Output Module
• 4 Relay Output SnapCard
• 8Z Hardwire Input SnapCard
• 4Z/2 Output SnapCard
• 24V SnapCard (check for availability)

Specifications

• Power Supply
  • Required Transformer:
    – US 24 VAC, Class II Single Tap 100 VA or Class I Single Tap100 VA
    – Canada 24 VAC, Class II Single Tap 120 VA or Class I Single Tap120 VA
  • Backup Battery: 12 VDC, 17.2 - 18.0 Ah rechargeable, sealed, lead-acid (up to 3 batteries, additional enclosure required for third battery)
  • Battery Backup Time Minimum 24 hours (depends on load and number of backup batteries installed)
  • Battery Test Every 4 hours (default) or 24 hours
  • Auxiliary Power 12 VDC, 5-amp built-in current limiting circuitry: SuperBus outputs limited to 650 mA each, long-range radio output limited to 250 mA
• Telephone/Modem
  • Dialing DTMF or pulse
  • Modem Up to 14,400 bps, Bell 103, Bell 212A, V.32bis, V.32, V.22bis, V.22, V.23, V.21, V.42bis
  • Telephone Interface Line seizure relay, DTMF phone control, line supervision
• Inputs/Outputs/Connections
  • General Purpose Inputs/Outputs 6 built-in; 1 additional built-in input only; up to 132 or 250 (depending on model) input zones total using optional SnapCards and SuperBus 2000 modules
  • 2-Wire Smoke Loops 1 (12- or 24- VDC); up to 20 devices (24 VDC option requires additional snapcard)
  • Voice Output 25 Watts, 4-8 Ohm speaker, supervised
  • Interior Siren Output Open collector, 150 mA maximum, 13.8 VDC maximum
  • Exterior Siren Output N.O
  • Relay contacts, 4.0A maximum at 24 VDC, 4.0A maximum at 24 VAC, 1.0A maximum at 70 VAC maximum
  • Auxiliary Power Outputs Regulated 12 VDC, 5 A
  • SuperBus Ports 2 – up to 31 modules per port
  • Long Range Radio Preprogrammed, on-board header
• Environmental
  • Operating Temperature 32º to 120º F (0º to 49º C)
  • Up to 140º F or 60º C under temporary conditions.
  • Storage Temperature -30º to 140º F (-34º to 60º C)
  • Maximum Humidity 90% relative humidity, noncondensing

Approvals/Listings

• FCC Part 15 and 68
• UL 365: Grade A, AA Police Connected Burglar Alarm Units and Systems
• UL 609: Local Burglar Alarm Units and System
• UL 985: Household Fire Warning System Units
• UL 1023: Household Burglar Alarm Units and System
• UL 1610: Central Station Burglar Alarm System Units
• UL 1635: Digital Alarm Communicator Systems
• UL 1637: Home Health Care Signaling Equipment
• CSFM California State Fire Marshall
• DOD Sensitive Compartment Information Fac (applied for)
• Complies with NFPA 72 for Fire Alarm Code

Physical Description

• Color Light gray
• Material 16 gauge steel
• Dimensions 21.5 x 14.75 x 5 inches