With available add-on modules to accommodate enhancements such as wireless integration, X-10 home automation, two-way voice, and cellemetry backup, the NX-6 provides flexible expansion capabilities for mid-size installations.
The NX-320E is a microprocessor controlled remote power supply module for the
NX-8 / NX-8E / NX-8-CF control panel. This power supply module has three (3)
programmable outputs and one (1) dedicated bell output. A maximum of eight (8)
power supply modules can be added to the NetworX control panel for a total output
count of 32, of which 24 are programmable and 8 are dedicated bell outputs.
These 24 programmable outputs can be used as auxiliary power, smoke detector power,
siren driver power, etc. (see chart on page 11). Each power supply module has a
Tamper terminal that can be used to supervise the metal enclosure. When the power
supply module is connected to the NX-8 / NX-8E / NX-8-CF control panel, the maximum
total wire run from the panel to all devices, including the NX-320E, is 2500 feet.
Additionally, the maximum total wire run from the power supply module to all outgoing
devices is 2500 feet.
Self Contained Indoor Siren -- At 119 db, the 748 is the loudest self-contained siren you can buy today. The fully tampered and weather-resistant 748 mounts directly to a 4" electrical box or wall -- eliminating the need for a cabinet. Priced below other sirens, the compact design of the attractive 748 makes installation easier than ever before -- indoors or out.
Hinged - The Wave's unique snap-open HINGED CASE DESIGN - an industry first for sounders - allows for installation without disassembly. TERMINAL STRIP - no soldering or splicing required. Recessed Wave 2F The Wave-F speaker and Wave 2F siren can be RECESSED in a standard double gang electrical box.
The ELK-150RT is a self-contained Siren in a tampered "No Rust" stainless steel enclosure. It features two sealed reed tamper switches, one on the Back plate and one on the Front Cover. The switches are normally closed and pre-wired in series. The ELK-150RT can produce two distinct sounds from a single input trigger. The stainless steel exterior reflects the color of the mounting surface allowing the ELK-150RT to blend easily with any residential or commercial building.
The ELK-WK1 is a an optional wall mount kit for use with the ELK-SL1
Strobe Light. The kit features a decorative snap-on trim cover with
all hardware for mounting the strobe to any flat surface or directly
to a single or double gang electrical box.
The ELK-RJSET is for use with Alarm System Communicators, Line Fault devices, or other equipment as a means of connecting to the incoming telephone line. Includes USOC RJ31X 8 pin modular surface mount jack and 6 ft. 8 wire modular cord with plug on one end and spade terminals on the other.
The DUAL TEC DT-500 motion sensor offers animal immunity up to 45 kg (100lbs) for your residential applications. Never before has there been a sensor with such reliable detection with this level of animal immunity.
Honeywell IntelliSense DT7235T DUAL Technology Motion Sensor, Pet Resistant
Motion Sensor The DT7235T DUAL TEC® Motion Sensor provides reliable protection with pet immunity for up to 100 lbs. in a simple installation configuration that requires no adjustments. Optimum performance is achieved using K-Band microwave technology and Uniform Sensitivity Optics.
The PetSmart NEXTDUOK Pet-Immune Dual Technology Detector: 80 lbs (K-980D) PIR/Microwave dual technology detector is a state-of-the-art pet immune detector. It offers immunity to pets weighing up to 36 kg (80 lb) with 12 x 12 m (40 x 40 ft) coverage. It can be wall or corner mounted for residential and commercial applications and comes with an integral swivel bracket. The K-980D operates with Visonic Ltd's TMR™ - True Motion Recognition signal processing and has triple event count protection, advanced system diagnostics and microwave supervision. (VS-K980D)
FlexCore™ Signal Processor - The FlexCore Signal Processor is an Application-Specific Integrated Circuit (ASIC), which processes sound data in parallel rather than sequentially for faster, more accurate detection decisions. The combination of proven FlexGuard™ performance with the speed of FlexCore processing provides unmatched false alarm immunity without compromising detection.
IntelliSense FG-1625F Flush Mount Glassbreak Detector
The new FG-1625F Glassbreak Detector uses the latest technology to provide faster response and increased false alarm immunity. The FG-1625F is specifically designed to allow fast, easy installation, while the adjustable sensitivity settings can compensate for the acoustics of any room. Optimum operation can be quickly verified using the FG-701 Glassbreak Simulator. The FG-1625F was designed to adequately cover all sizes of single gang electrical boxes. Flush mount installations are now easier and better looking than ever.
The new FG-1625R Glassbreak Detector uses the latest technology to provide faster response and increased false alarm immunity. The FG-1625R is specifically designed to allow fast, easy installation, while the adjustable sensitivity settings can compensate for the acoustics of any room. Optimum operation can be quickly verified using the FG-701 Glassbreak Simulator.
Honeywell FG1625RFM Glass Break Detector, Round, Flush Mount
The FG1625RFM Glassbreak Detector uses field proven FlexGuard® technology to provide faster response and increased false alarm immunity. The FG1625RFM is specifically designed to allow a fast, easy installation, while the adjustable sensitivity settings can compensate for the acoustics of any room. Optimum operation can be quickly verified using the FG701 Glassbreak Simulator.
System Sensor’s i3™ series smoke detectors represent a significant advancement in
conventional detection. The i3 family is founded on three principles: Installation
ease, Intelligence, and Instant inspection.
NX-656 Series Glass Guard Sensors from GE Interlogix
NX-656, NX-657 Glass Guard Sensor
The Glass Guard glassbreak sensor mounts directly on glass, making it perfect
for homes with big picture windows and for businesses with large storefront
glass.
NX-491T Wireless ESL Smoke Detector from GE Interlogix
ESL battery operated photoelectric smoke detectors come in a
variety of models for different applications. ESL offers both
supervised wireless models and stand-alone models.
The supervised wireless models are available in two types. The
residential supervised models can be used with Caddx and ITI
panels that support wireless devices and the commercial
supervised wireless models can be used with Advent panels. All
the supervised wireless models ship with batteries and ITI
transmitters included, plus feature Learn Mode technology..
The stand-alone models can be shipped with batteries for use as
non-system smoke detectors for use in various applications where
an end-user chooses not to install a monitored smoke detector.
Additionally, other manufacturers with proprietary transmitters
and systems can use the stand-alone models when appropriately
listed with UL.
GE Security NX-695 Wireless Flood / Water Leak Detector
The Caddx NX-695 water sensor spares you the headaches of water leaks that go undetected for hours and even days. The sensor sounds an environmental alarm when it detects water.
GE Security 4 Button Keyfob Transmitter from GE Interlogix
These small, powerful touchpads provide convenient portable control over security system, lights, panic, and garage door functions of your security system. Features: Light control capability, Auxiliary panic button, Key chain ring included, Specifications, Color: Black Dimensions: 1.4" wide, 2.25" high, .38" deep Battery: 12 VDC, 33 mAh alkaline battery (included) Battery life: 5-8 years Operating temp: 10°-120°F
GE Security Pendant Panic Button from GE Interlogix
Designed to go just about anywhere, this sensor allows you to activate a 24-hour emergency alarm whether your at home, in the yard, or in the shower. Features: Water and shock resistant. Recessed panic button prevents false alarms Can be worn around neck. Built-in belt clip allows sensor to be attached to belt or purse. Specifications: Necklace cord (included), belt clip (included), and wall mounting (bracket sold separately) Color: White Dimensions: 1.75" wide, 2.25" high, .75" deep Batteries: 3.5 VDC 1/2 AA Lithium Battery.
