GE Security NX-8E Intrusion Control Panel, 8-192 Zone - NetworX
The most versatile NetworX control available, the NX-8E offers 8-192 zones. Ideal for home automation to medium-sized commercial installations, the NX-8E is flexible enough to meet the most demanding applications.
Features
Expandable to 192 fully programmable zones
All zones programmable as fire or burglary
Maximum 24 keypads
Wireless expansion up to 192 zones
Up/downloadable with competitor lockout
Up to 8 partitions
Maximum 8 keypads per partition
2-wire or 4-wire smoke detectors
Automatic arming with auto retry
Assign zones to one or multiple partitions
240 four digit user codes
Zone activity monitor
Late-to-close/early-to-open reporting
Built-in RS-232 serial interface for printer or direct computer connect (adapter cable needed)
2 on-board relays (one Form A,One Form B)
2 separately ptc protected auxiliary power outputs
GE Security NX-8E Intrusion Control Panel, 8-192 Zone - NetworX
The most versatile NetworX control available, the NX-8E offers 8-192 zones. Ideal for home automation to medium-sized commercial installations, the NX-8E is flexible enough to meet the most demanding applications.
UL 609*, UL635, UL 985, UL 1023, UL 1610, UL 1635, UL 1637
*The UL 609 rating only applies when using the NX-003C UL commercial enclosure
The NX-320E is a microprocessor controlled remote power supply module for the
NX-8 / NX-8E / NX-8-CF control panel. This power supply module has three (3)
programmable outputs and one (1) dedicated bell output. A maximum of eight (8)
power supply modules can be added to the NetworX control panel for a total output
count of 32, of which 24 are programmable and 8 are dedicated bell outputs.
These 24 programmable outputs can be used as auxiliary power, smoke detector power,
siren driver power, etc. (see chart on page 11). Each power supply module has a
Tamper terminal that can be used to supervise the metal enclosure. When the power
supply module is connected to the NX-8 / NX-8E / NX-8-CF control panel, the maximum
total wire run from the panel to all devices, including the NX-320E, is 2500 feet.
Additionally, the maximum total wire run from the power supply module to all outgoing
devices is 2500 feet.
Caddx NX-590E TCP/IP Interface Module from GE Interlogix
The NX-590E Network Module brings new functionality to
the world of controls with Ethernet connectivity to your central
station. Working in conjunction with the Osborne-Hoffman
Network Receiver, a direct pipe is established into your
current automation.
NX-656 Series Glass Guard Sensors from GE Interlogix
NX-656, NX-657 Glass Guard Sensor
The Glass Guard glassbreak sensor mounts directly on glass, making it perfect
for homes with big picture windows and for businesses with large storefront
glass.
NX-491T Wireless ESL Smoke Detector from GE Interlogix
ESL battery operated photoelectric smoke detectors come in a
variety of models for different applications. ESL offers both
supervised wireless models and stand-alone models.
The supervised wireless models are available in two types. The
residential supervised models can be used with Caddx and ITI
panels that support wireless devices and the commercial
supervised wireless models can be used with Advent panels. All
the supervised wireless models ship with batteries and ITI
transmitters included, plus feature Learn Mode technology..
The stand-alone models can be shipped with batteries for use as
non-system smoke detectors for use in various applications where
an end-user chooses not to install a monitored smoke detector.
Additionally, other manufacturers with proprietary transmitters
and systems can use the stand-alone models when appropriately
listed with UL.
GE Security NX-695 Wireless Flood / Water Leak Detector
The Caddx NX-695 water sensor spares you the headaches of water leaks that go undetected for hours and even days. The sensor sounds an environmental alarm when it detects water.
GE Security 4 Button Keyfob Transmitter from GE Interlogix
These small, powerful touchpads provide convenient portable control over security system, lights, panic, and garage door functions of your security system. Features: Light control capability, Auxiliary panic button, Key chain ring included, Specifications, Color: Black Dimensions: 1.4" wide, 2.25" high, .38" deep Battery: 12 VDC, 33 mAh alkaline battery (included) Battery life: 5-8 years Operating temp: 10°-120°F
GE Security Pendant Panic Button from GE Interlogix
Designed to go just about anywhere, this sensor allows you to activate a 24-hour emergency alarm whether your at home, in the yard, or in the shower. Features: Water and shock resistant. Recessed panic button prevents false alarms Can be worn around neck. Built-in belt clip allows sensor to be attached to belt or purse. Specifications: Necklace cord (included), belt clip (included), and wall mounting (bracket sold separately) Color: White Dimensions: 1.75" wide, 2.25" high, .75" deep Batteries: 3.5 VDC 1/2 AA Lithium Battery.
GE Security 1125 Series 3/8 dia. Stubby Press Fit Contacts
The Sentrol "Stubby" Press Fit magnetic contact is a 3/8" dia. switch designed specifically for applications where space is limited. The short length makes it ideal for thin framed windows and doors where longer units cannot be used. Press fit ribs on the housing make for quick, easy installation.
GE Security 1275 3/8" dia. Wing Fit Magnetic Contacts
The Sentrol 3/8" diameter Wing Fit magnetic contact is ideal for new construction applications, where wood swell poses a potential threat to the contact housing. The "wings" flex to hold the contact securely in place as the wood expands and contracts.
GE Security R1125 Mini-Max 3/8" dia. Stubby Press Fit Contacts with Mini-Max Magnets
The Sentrol R1125 magnetic contacts deliver strong protection in a low-profile design - virtually eliminating the risk of window damage during installation. Just 1/8" thick, the magnets surface mount easily with glue, double-stick tape (included), or stainless steel screw (included).
1035 Series Miniature Self-Adhesive from GE Interlogix
Sentrol's Surface Mount Self-Adhesive Contact saves installation time through the use of a specially
formulated 3m® adhesive tape. The tape, which establishes a permanent bond between the contact and the
surface, can be repositioned during the first 5 minutes. A low profile and small footprint combine with
reliable Sentrol technology to make this series the perfect magnetic contact for those situations where
drilling holes is impractical.
The Sentrol Roller Plunger contacts save installation time while providing reliable magnetic contact security. The contact switch is activated when the door opens, releasing the tension on the wheel plunger. Drill only one hole to mount the roller plungers; the entire magnetic contact is housed in a economical single unit. Recessed mounting hides the contact within the frame of the door it protects.
Sentrol's Miniature Surface Mount with Armored Cable
overhead door magnetic contact is for use in rigorous environments of
commercial and industrial installations. The floor mount units are
constructed with a low-profile heavy cast aluminum housing. The reed switch
assembly is fully encased in Sentrol's exclusive polyurethane potting
material to prevent damage due to moisture or humidity. A wide operation gap
distance of up to three inches makes installation easy and helps prevent false
alarms caused by door movement or damaged and loose fitting doors.
System Sensor 2WT-B Smoke Detector: 2-wire with 135-degree Thermal Sensor, I3 Series
Installation Ease. Intelligence. Instant Inspection. These are the guiding principles of System Sensor's i3 series of photoelectric smoke detectors. Designed to take conventional smoke detectors to a new level, these principles translate directly into significantly lower installation, testing and maintenance costs.
System Sensor’s i3™ series smoke detectors represent a significant advancement in
conventional detection. The i3 family is founded on three principles: Installation
ease, Intelligence, and Instant inspection.
The ELK-RJSET is for use with Alarm System Communicators, Line Fault devices, or other equipment as a means of connecting to the incoming telephone line. Includes USOC RJ31X 8 pin modular surface mount jack and 6 ft. 8 wire modular cord with plug on one end and spade terminals on the other.
Z-BLOCKER®
In-Line DSL Filter for Residential Alarm Systems
Unique alarm panel filter protects the residential and small business alarm system telephone service (POTS) interface, which dials out to the alarm company in the event of an emergency. Without this protection, alarm panels on telephone lines with DSL may have difficulty reporting incidents.
