Honeywell VISTA-32FB Commercial Burglar Alarm Control Panel

Designed to integrate seamlessly with CCTV, access control, and ADEMCO's full range of fire and burglary components, the VISTA-32FB provides the ultimate protection of life and property. The UL listed Commercial Fire and Burglary Control Platform can control up to two separate partitions independently, and supports up to 32 zones/points using hardwired, wireless and addressable V-PLEX technologies. A diverse line of ADEMCO initiating devices, notification circuits, digital dialers, keypads, RF receivers and relays support this extremely powerful control platform. Advanced technology, combined with simple end-user operation, make the versatile VISTA-32FB the smartest choice for the most demanding applications.

• Supports addressable V-Plex access control points using VistaKey (1 to 4 doors)
• Supports up to 16 doors of access control using VISTA Gateway Module (VGM)*
  * Connects to Northern Computers PassPoint Access Control Systems. Maximum 32 doors.
• Supports CCTV applications with the new VistaView-100 CCTV Switcher Module
• Identifies the point or zone of a fire using the new FSA-8/FSA-24 Fire System Annunciator
• Supports eight hardwired zones, 24 V-Plex addressable points/zones, or 32 wireless points/zones
• Can control two separate areas (partitions) independently
• Stores up to 512 events and can accommodate 75 user codes
• New E2 Software Simplifies Programming
• Easily programmed and maintained with newly upgraded Compass Downloader Software
• Automatic smoke detector sensitivity maintenance testing
• Commercial UL Wireless Fire and Burg

Additional Features

• Notification Appliance Circuits (two):
  – Programmable
  – Temporal code compliant
  – Individually silenceable
• Programmable on-board auxiliary relay
• SIA false alarm reduction features:
  – Exit error logic
  – Exit delay reset
  – Cross zoning
  – Call waiting defeat
  – Recent close report
• Supports commercial hardwired, addressable V-Plex polling loop and wireless zones
• Hardwired zones
  – Provides 9 style B hardwired zones
  – EOLR supervised for Fire and UL burglary installations
  – Supports N.O. or N.C. sensors
  – Individually assignable to one or all eight partitions
  – Up to 16 two-wire smoke detectors each on zone one and two (32 total)
  – Up to 50 two-wire glass break detectors on zone eight
• Patented addressable V-PLEX polling loop technology
  – Supports up to 24 two-wire V-PLEX zones/points
  – Global polling technology for faster processing
  – Increased current draw capacity (128mA)
  – Supervised by panel
  – Individually assignable to partitions, notification circuit (bell) output or aux relay
  – 4,000 ft capability without the use of shielded cable
  – Extender/Isolation bus module
  – Two-wire smoke detector zone/group expansion module adds two or four zones
  – Eight zone - Class A and B extender module
  – Eight zone - Class B extender module
  – One zone supervised contact monitor module
• UL Listed wireless expansion
  – Supports up to 32 wireless zones/points using 5881ENHC receiver
  – Supervised by control for check-in signals
  – Tamper protection for transmitters
  – Individually assignable up to eight partitions
  – Supports UL864/NFPA approved wireless smoke detectors
• Event reporting
• Local printer of access or VISTA related event
• Scheduled uploading of events to central station
• Up to four doors using VistaKey Access Control
• Stored events for one call retrieval
• Communication
  – Phone mapping by zone response type
  – Supports VIP Interactive Phone Voice Module
  – Panel operation during download
  – Uploading equipment list to central station
  – Communication to PassPoint via VISTA Gateway Module

Supported by a diverse line of ADEMCO initiating devices, the VISTA-32FB is well suited for a variety of smaller to medium sized applications as an integrated fire and burglary control-including restaurants, small retail stores and shops, churches and synagogues, strip malls, larger residences and small factory and warehouse environments.

Applications
The VISTA-32FB control is well suited for a variety of applications as an integrated fire and burglary control. A diverse line of ADEMCO initiating devices supports this extremely powerful control. Some of the applications supported are: medical and professional buildings, churches or synagogues, office buildings, schools, strip malls, larger residences and factory or warehouse environments.

Installation
The VISTA-32FB alarm system has been designed to mount both quickly and easily. It meets all applicable requirements for UL commercial fire and burglary installations.