Get the ultimate in versatility with Securitron’s High Quality Hardware Accessories for the Magnalock Series.
Glass Door Hardware
The Glass Door Bracket permits Magnalock installation on a solid glass door. The bracket is permanently glued to the glass via a special adhesive. The strike plate then screws into the bracket, as glass doors cannot be drilled. The part numbers are: GDB (bracket) and AKG (adhesive kit).
Magnalocks can be optionally furnished in full-length housings to provide the ultimate in security and finished appearance. Housings may be selected in vertical or horizontal configurations with one or two locks. The addition of the second lock is either for enhanced security, or for a double door. The completed installation provides unmatched architectural appearance and vandal resistance.
The EASB is specifically designed for high security applications on stiff doors (such as prison doors) where the door opens outwards into the protected area. This permits an impact attack (as opposed to pulling the door). When the door is quite ridged, the force of the impact transmits will to the lock. The EASB replaces the standard sex bolt and includes a powerful internal spring which absorbs and dissipates the force of the blow, replicating Magnalock performance on a more flexible door and preserving optimum security.
The Stop Filler Plate is used in installations where only part of the magnet body is on the stop. The plate extends the stop to provide a flat mounting surface for the magnet. Stop Filler Plates are 8” (Models 32 and 62) or 12” long (Model 82) With a varying thickness to match the stop thickness. Thicknesses offered are: ¼”, 3/8”, ½” and 5/8” with a finish suffix of “CL” for clear anodized aluminum or “BK” for the black anodized aluminum.
The Universal Header Bracket is used to extend a narrow header (often found on aluminum frame glass doors) to permit mounting of the Magnalock. The bracket is positioned either to extend 1” or 1-1/2” and also serves to conceal the hookup cable within its hollow interior. Model UHB works with Models 32, 34 or 62 series Magnalocks and the longer UHB-82 works with the Model 82. Both with a finish suffix of “CL” for clear anodized aluminum or “BK” for black anodized aluminum.
![FC-1 Finish Caps [Pack Of 24]](images_products/fc_1_finish_caps_pack_s15504.jpg "FC-1 Finish Caps [Pack Of 24]")
![FW-1 Flat Washers [Pack Of 24]](images_products/fw_1_flat_washers_pack_s15507.jpg "FW-1 Flat Washers [Pack Of 24]")
![MOV-50 MOV [Pack Of 50]](images_products/mov_50_mov_pack_of_s15612.jpg "MOV-50 MOV [Pack Of 50]")
![RW-1 Rubber Washers [Pack Of 24]](images_products/rw_1_rubber_washers_pack_s15670.jpg "RW-1 Rubber Washers [Pack Of 24]")
![SDG-1 Drill Guide [Heavy Duty]](images_products/sdg_1_drill_guide_heavy_s15703.jpg "SDG-1 Drill Guide [Heavy Duty]")
