DM62 Magnalock 62 Double 12/24 VDC: Securitron

DM62: M62 Double Magnalock 12/24 VDC, 1200 lbs, Dual Voltage

For double doors without a center mullion, the DM-62 supplies two 1,200 lb. holding force Model 62 Magnalocks in a single, brushed stainless steel housing. The 22” [572mm] wide housing provides adequate lock separation for internal obstructions often found in double doors. Electrically, the dual locks are controlled as one.

DM62SC Magnalock 62 Double 12/24 VDC, Senstat, Form C: Securitron

HHD-62 Full Housing M62 Double Horizontal: Securitron

HHD-82 Full Housing M82 Double Horizontal: Securitron

HVD-62 Full Housing M62 Double Vertical: Securitron

HVD-82 Full Housing M82 Double Vertical: Securitron

M32SC-12 Magnalock: 600 lb. Holding Force, Senstat Form-C, 12 VDC

Application - 600 lb. holding force Magnalock recommended for applications where physical assault on the door is not expected, like access controlled interior rooms and secure areas within buildings. Specify 12 or 24 VDC when ordering.

M34R Recessed Mag 600lbs 12/24, 12/24Volt: Securitron

M38 600 lb Dual Voltage Bracket Mount Magnalock: Securitron

Model 68 has a holding power of 1200 pounds, while still offering the same built in splice chamber and NEW bracket mount design as the M38. As with the M62, on which it was based, the M68 is appropriate for exterior and perimeter doors through which criminals could gain entrance to cause substantial economic loss. Entry cannot be forced without special tools, or before the door and frame actually give way.