|
| Home Automation > Mier Products Driveway Alarms |
 |
|
|
Mier Products
Driveway Alarms
Guard Against Surprises with the Drive-Alert for your Home or Farm
How often have you been surprised or startled by an unexpected caller at your door? Or how often have you looked out your window to see a truck or car in your drive…or just leaving?
In this day of rapidly rising crime in rural and suburban areas, you need to know who is entering your property. All Three Models of Drive-Alert Driveway Alarms let you know just that – by triggering an electronic sound or turning on a light in your home whenever it detects a vehicle in your driveway.
The Drive-Alert works by sensing the motion of a metal object that passes within eight feet of a buried sensor. When a car, truck, or other object passes the sensor, a signal is transmitted to the control panel, which in turn uses the electrical wiring of the house to send signals to Remote Chimes, Lamp Modules, or Wall Switch Modules.
Easy to install.
Installing any of the Drive-Alert models is quick and easy. You simply bury the sensor 6" deep alongside your driveway – then, run the cable just under the grass line up to the control panel. (Just use a sharp spade to open a shallow channel for the cable and smooth it over by stepping on it.)
Then, attach the three color-coded wires to three clearly marked terminals on the wall-mounted control panel, located in a convenient place in your home – and plug the unit into 120-volt power. No hose across the driveway, no light beams to break, no buttons to push. All automatic, sensitivity-range adjustable, and hidden from sight.
The remainder of the installation is even easier. Depending upon the Drive-Alert model you choose, you will have Remote Chimes, Lamp Modules, or Wall Switch Modules to install. The Drive-Alert DA-503 supports the use of Remote Chimes; the Drive-Alert DA-504 supports the Remote Chimes, Wall Switch Module, or Lamp Module.
|
|
|
DA-500 The Drive-Alert Driveway Alarm
The DA-500 Drive-Alert Driveway Alarm System is the security industry's most-often used method for detecting a vehicle when it enters a driveway. A variety of features and options make this unit ideal for both residential and commercial applications.
Includes
- Control panel
- Internal Alarm Whistle
- DA-051-100 Sensor with 100 ft of cable
- Sensors with longer lengths of cable are available
|
|
|
|
|
|
DA-500 The Drive-Alert Driveway Alarm
The DA-500 Drive-Alert Driveway Alarm System is the security industry's most-often used method for detecting a vehicle when it enters a driveway. A variety of features and options make this unit ideal for both residential and commercial applications.
|
|
|
|
|
|
DA-503 Drive-Alert Driveway Alarm
New Model - More Features and Easier to Install
The New DA-503 Drive-Alert Driveway Alarm system provides the same dependable method of vehicle detection as the DA-500. However, the DA-503 incorporates built-in X-10 transmitters that use a home's existing electrical wiring to transmit a signal which sounds chimes when a vehicle enters a driveway, or wherever a sensor has been buried. The once difficult and expensive task of hard wiring security sound into rooms and remote areas no longer exists.
The DA-503 can be ordered as a complete unit which includes a control panel, 1 DA-058 Remote Chime, and 1 sensor with 100 feet of cable. Any number of chimes may be used and longer lengths of cable are available. See our accessories section for details.
- Control panel
- DA-058 Remote Chime
- DA-051-100 Sensor with 100 ft. of cable
- Sensors with longer lengths of cable are available
|
|
|
|
|
|
DA-503 Drive-Alert Control Panel
New Model - More Features and Easier to Install
The New DA-503 Drive-Alert Driveway Alarm system provides the same dependable method of vehicle detection as the DA-500. However, the DA-503 incorporates built-in X-10 transmitters that use a home's existing electrical wiring to transmit a signal which sounds chimes when a vehicle enters a driveway, or wherever a sensor has been buried. The once difficult and expensive task of hard wiring security sound into rooms and remote areas no longer exists.
The DA-503 can be ordered as a complete unit which includes a control panel, 1 DA-058 Remote Chime, and 1 sensor with 100 feet of cable. Any number of chimes may be used and longer lengths of cable are available. See our accessories section for details.
- Control panel
- DA-058 Remote Chime
- DA-051-100 Sensor with 100 ft. of cable
- Sensors with longer lengths of cable are available
|
|
|
|
|
|
DA-504 Drive-Alert Driveway Alarm
The New DA-504 Drive-Alert Driveway Alarm system provides the same dependable method of vehicle detection as the DA-500. However, the DA-504 incorporates built-in X-10 transmitters that use a home's existing electrical wiring to transmit a signal which sounds chimes and turns on lights when a vehicle enters a driveway, or wherever a sensor has been buried. The once difficult and expensive task of hard wiring security sound into rooms and remote areas no longer exists.
|
|
|
|
|
|
DA-504 Drive-Alert Driveway Alarm
The New DA-504 Drive-Alert Driveway Alarm system provides the same dependable method of vehicle detection as the DA-500. However, the DA-504 incorporates built-in X-10 transmitters that use a home's existing electrical wiring to transmit a signal which sounds chimes and turns on lights when a vehicle enters a driveway, or wherever a sensor has been buried. The once difficult and expensive task of hard wiring security sound into rooms and remote areas no longer exists.
|
|
|
|
|
|
DA-051-10 Solid Sate Sensor with Direct Burial Cable, 10 ft - Meier Products
Extra sensors may be used when knowledge of vehicle movement in more than one area is desired. The PVC-encased sensor comes with 10 feet of direct burial cable attached. Sensors with additional lengths of cable are available. The sensor may be placed up to 5,000 feet from the Electronic Master Control. As many as three sensors may be added without loss of sensitivity.
|
|
|
|
|
|
DA-051-100 Solid Sate Sensor with Direct Burial Cable, 100 ft - Meier Products
Extra sensors may be used when knowledge of vehicle movement in more than one area is desired. The PVC-encased sensor comes with 100 feet of direct burial cable attached. Sensors with additional lengths of cable are available. The sensor may be placed up to 5,000 feet from the Electronic Master Control. As many as three sensors may be added without loss of sensitivity.
|
|
|
|
|
|
DA-051-1000 Solid Sate Sensor with Direct Burial Cable, 1,000 ft - Meier Products
Extra sensors may be used when knowledge of vehicle movement in more than one area is desired. The PVC-encased sensor comes with 1,000 feet of direct burial cable attached. Sensors with additional lengths of cable are available. The sensor may be placed up to 5,000 feet from the Electronic Master Control. As many as three sensors may be added without loss of sensitivity.
|
|
|
|
|
|
DA-051-1100 Solid Sate Sensor with Direct Burial Cable, 1,100 ft - Meier Products
Extra sensors may be used when knowledge of vehicle movement in more than one area is desired. The PVC-encased sensor comes with 1,000 feet of direct burial cable attached. Sensors with additional lengths of cable are available. The sensor may be placed up to 5,000 feet from the Electronic Master Control. As many as three sensors may be added without loss of sensitivity.
|
|
|
|
|
|
DA-051-1200 Solid Sate Sensor with Direct Burial Cable, 1,200 ft - Meier Products
Extra sensors may be used when knowledge of vehicle movement in more than one area is desired. The PVC-encased sensor comes with 1,000 feet of direct burial cable attached. Sensors with additional lengths of cable are available. The sensor may be placed up to 5,000 feet from the Electronic Master Control. As many as three sensors may be added without loss of sensitivity.
|
|
|
|
|
|
DA-051-1300 Solid Sate Sensor with Direct Burial Cable, 1,300 ft - Meier Products
Extra sensors may be used when knowledge of vehicle movement in more than one area is desired. The PVC-encased sensor comes with 1,000 feet of direct burial cable attached. Sensors with additional lengths of cable are available. The sensor may be placed up to 5,000 feet from the Electronic Master Control. As many as three sensors may be added without loss of sensitivity.
|
|
|
|
|
|
DA-051-1400 Solid Sate Sensor with Direct Burial Cable, 1,400 ft - Meier Products
Extra sensors may be used when knowledge of vehicle movement in more than one area is desired. The PVC-encased sensor comes with 1,000 feet of direct burial cable attached. Sensors with additional lengths of cable are available. The sensor may be placed up to 5,000 feet from the Electronic Master Control. As many as three sensors may be added without loss of sensitivity.
|
|
|
|
|
|
DA-051-150 Solid Sate Sensor with Direct Burial Cable, 150 ft - Meier Products
Extra sensors may be used when knowledge of vehicle movement in more than one area is desired. The PVC-encased sensor comes with 150 feet of direct burial cable attached. Sensors with additional lengths of cable are available. The sensor may be placed up to 5,000 feet from the Electronic Master Control. As many as three sensors may be added without loss of sensitivity.
|
|
|
|
|
|
DA-051-1500 Solid Sate Sensor with Direct Burial Cable, 1,500 ft - Meier Products
Extra sensors may be used when knowledge of vehicle movement in more than one area is desired. The PVC-encased sensor comes with 1,500 feet of direct burial cable attached. Sensors with additional lengths of cable are available. The sensor may be placed up to 5,000 feet from the Electronic Master Control. As many as three sensors may be added without loss of sensitivity.
|
|
|
|
|
|
DA-051-1000 Solid Sate Sensor with Direct Burial Cable, 1,000 ft - Meier Products
Extra sensors may be used when knowledge of vehicle movement in more than one area is desired. The PVC-encased sensor comes with 1,000 feet of direct burial cable attached. Sensors with additional lengths of cable are available. The sensor may be placed up to 5,000 feet from the Electronic Master Control. As many as three sensors may be added without loss of sensitivity.
|
|
|
|
|
|
DA-051-1000 Solid Sate Sensor with Direct Burial Cable, 1,000 ft - Meier Products
Extra sensors may be used when knowledge of vehicle movement in more than one area is desired. The PVC-encased sensor comes with 1,000 feet of direct burial cable attached. Sensors with additional lengths of cable are available. The sensor may be placed up to 5,000 feet from the Electronic Master Control. As many as three sensors may be added without loss of sensitivity.
|
|
|
|
|
|
DA-051-1000 Solid Sate Sensor with Direct Burial Cable, 1,000 ft - Meier Products
Extra sensors may be used when knowledge of vehicle movement in more than one area is desired. The PVC-encased sensor comes with 1,000 feet of direct burial cable attached. Sensors with additional lengths of cable are available. The sensor may be placed up to 5,000 feet from the Electronic Master Control. As many as three sensors may be added without loss of sensitivity.
|
|
|
|
|
|
DA-051-200 Solid Sate Sensor with Direct Burial Cable, 200 ft - Meier Products
Extra sensors may be used when knowledge of vehicle movement in more than one area is desired. The PVC-encased sensor comes with 200 feet of direct burial cable attached. Sensors with additional lengths of cable are available. The sensor may be placed up to 5,000 feet from the Electronic Master Control. As many as three sensors may be added without loss of sensitivity.
|
|
|
|
|
|
DA-051-250 Solid Sate Sensor with Direct Burial Cable, 250 ft - Meier Products
Extra sensors may be used when knowledge of vehicle movement in more than one area is desired. The PVC-encased sensor comes with 100 feet of direct burial cable attached. Sensors with additional lengths of cable are available. The sensor may be placed up to 5,000 feet from the Electronic Master Control. As many as three sensors may be added without loss of sensitivity.
|
|
|
|
|
|
DA-051-300 Solid Sate Sensor with Direct Burial Cable, 300 ft - Meier Products
Extra sensors may be used when knowledge of vehicle movement in more than one area is desired. The PVC-encased sensor comes with 100 feet of direct burial cable attached. Sensors with additional lengths of cable are available. The sensor may be placed up to 5,000 feet from the Electronic Master Control. As many as three sensors may be added without loss of sensitivity.
|
|
|
|
|
|
DA-051-350 Solid Sate Sensor with Direct Burial Cable, 350 ft - Meier Products
Extra sensors may be used when knowledge of vehicle movement in more than one area is desired. The PVC-encased sensor comes with 100 feet of direct burial cable attached. Sensors with additional lengths of cable are available. The sensor may be placed up to 5,000 feet from the Electronic Master Control. As many as three sensors may be added without loss of sensitivity.
|
|
|
|
|
|
DA-051-400 Solid Sate Sensor with Direct Burial Cable, 400 ft - Meier Products
Extra sensors may be used when knowledge of vehicle movement in more than one area is desired. The PVC-encased sensor comes with 400 feet of direct burial cable attached. Sensors with additional lengths of cable are available. The sensor may be placed up to 5,000 feet from the Electronic Master Control. As many as three sensors may be added without loss of sensitivity.
|
|
|
|
|
|
DA-051-400 Solid Sate Sensor with Direct Burial Cable, 400 ft - Meier Products
Extra sensors may be used when knowledge of vehicle movement in more than one area is desired. The PVC-encased sensor comes with 400 feet of direct burial cable attached. Sensors with additional lengths of cable are available. The sensor may be placed up to 5,000 feet from the Electronic Master Control. As many as three sensors may be added without loss of sensitivity.
|
|
|
|
|
|
DA-051-400 Solid Sate Sensor with Direct Burial Cable, 400 ft - Meier Products
Extra sensors may be used when knowledge of vehicle movement in more than one area is desired. The PVC-encased sensor comes with 400 feet of direct burial cable attached. Sensors with additional lengths of cable are available. The sensor may be placed up to 5,000 feet from the Electronic Master Control. As many as three sensors may be added without loss of sensitivity.
|
|
|
|
|
|
The same electronic whistle which is contained inside the DA-500 control box is mounted on a chrome plate for installation in additional areas such as a den, kitchen, or bedroom. As many as 10 remote whistles may be installed.
|
|
|
|
|
The chime makes a pleasant doorbell sound when activated. These chimes may be plugged into any 120-volt receptacle, allowing for use at several remote locations. Any number may be used.
|
|
|
|
|
The wall switch replaces any normal household wall switch, and when it receives a signal will turn on the lights that switch controls. Usually installed at a location controlling front door or garage door lights. Can also be used to turn lights on and off as any switch does.
|
|
|
|
|
|
