PC4164-433 Wireless Receiver

• Supports 64 wireless zones, 16 wireless keys
• PC4164-433 is compatible with the MAXSYS® control panel

DSC PC5132-433 Wireless Receiver

• Supports 32 wireless zones, 16 wireless keys
• All wireless detectors are fully supervised for communication integrity
• Easy detector enroll process
• Compatible with all PowerSeries control panels

• Compatible with all PowerSeries control panels
• Can be used to connect up to 4 wireless receivers to any PowerSeries control panel for increased coverage
• The PC5320 module supports:
  • PC5132-433
  • RF5108-433

Wireless Passive Infrared Motion Detector

• Based on the Bravo?3D hardwire motion detector
• High traffic shutdown
• Pet-immunity up to 60 lbs (27 kg)
• 1 lithium battery included
• WLS904L-433 available in Europe

WLS912L Wireless Glassbreak Detector

• Based on the Acuity glassbreak detector
• Tamper activated test mode:
• Can be tested using the AFT-100 glassbreak tester
• 2 lithium batteries included

WS4938 Wireless Key

• Activation via one large, easy-to-use button
• Attractive, compact design
• Full two-second delay on panic button
• Integrated LED to indicate signal transmission
• Neck strap included
• Reliable 433MHz technology
• Multifunction clip included
• Water resistant
• Long-life lithium batteries included
• UL/ULC approved
• Supervised

WS4939 Wireless Key

• 4 programmable function keys
• Small compact design
• Integrated LED to indicate a transmission
• Silk-screen buttons (durable, easy to see)
• Belt clip included
• Includes optional generic rubber button insert
• 433 MHz technology
• Uses long life lithium batteries
• Full 3 second delay on panic key to reduce false alarms

WS4939 Key Case

• Compact, attractive design
• Durable, scratch-resistant buttons
• Four programmable function keys
• Powered by long-life lithium batteries (included)
• Full three-second delay on panic alarm to reduce false alarms
• Multifunction belt clip
• Reliable 433 MHz technology
• Optional generic rubber insert
• Eight designer cases (optional)
• FCC, IC, UL and ULC approved

WS4949 Wireless Key

• Cost effective
• Two-button, three-channel wireless key
• Activation via two large, scratch-resistant buttons
• Attractive, compact design Full three-second delay on panic function
• Integrated LED to indicate signal transmission
• Reliable 433MHz technology
• Long-life lithium batteries included
• FCC/IC approved

WS4959 Wireless Key

• 12 programmable functions
• Attractive, compact design
• Integrated tri-color LED to indicate signal transmission and security modes
• Four durable, scratch-resistant buttons and center toggle button
• Multifunction clip included
• Reliable 433MHz technology
• Full three-second delay on panic function
• Long-life lithium batteries included
• FCC/IC approved

Napco Replacement Chip for P3200 Alarm Control Panel

Replacement Chip for P3200 Alarm Control Panel

Features

• UL listed for supplemental use only
• Input power: 12 V DC nominal, 60 mA (supplied by control panel connections)
• Comes with 6 conductor Modular to Modular (RJ12 Style) cable and 1 SE-AUTOMATION EPROM
• GEM-RS232KIT includes:
  • RS232 Converter
  • 6-conductor Modular to Modular (RJ12 Style) cable
  • 8-Pin Modulator (RJ45 Style) to DB9 Male Adapter
  • 8-Pin Modular (RJ145 Style) to DB9 Female Adapter
  • SE-AUTOMATION EPROM

The RB3008 and RM3008 are 8-channel relay interface accessories for use with GEM-Series (except GEM-P800), MA3000, and Signature SS-P and 5000-Series control panels. The RB3008 Relay Board is designed for installation inside an H1518 or CF1518 housing. The RM3008 Relay Module, a self-contained remote equivalent of the RB3008, may be used with all control panels, regardless of housing. It connects onto the remote panel bus along with such other accessories as keypads and zone expansion modules. Up to 8 RB3008/RM3008 units may be used.

PCI MINI Programming Adaptor Kit

Use this interface and software to program and test your Napco Gemini alarm system. Plug the supplied cable into the J3 Port of your Napco Gemini control panel and the other end into the supplied adaptor. The adaptor plugs into a 9-pin (DB9) serial port on your PC or laptop.

Napco's Quickloader software is included with the kit.

• PCI Mini Adaptor.
• 6'cable
• Napco Quickloader Windows Programming Software.