Use this interface and software to program and test your Napco Gemini alarm system. Plug the supplied cable into the J3 Port of your Napco Gemini control panel and the other end into the supplied adaptor.
The adaptor plugs into a 9-pin (DB9) serial port on your PC or laptop.
Napco's Quickloader software is included with the kit.
Ease in mounting and good looks are just two of the reasons that make the MPI-35 and Flush-Mount MPI-35F popular. The MPI-35 has a removable back plate which attaches to any flat surface. The MPI-35F mounts semi-flush into a hollow surface with a snap-on trim ring to conceal the mounting screws. Both are rated for operation at 10 Watts nominal, 15 Watt peak.
The ELK-1RT is a rugged 30 Watt, 8 Ohm speaker mounted in a tamper resistant, "No Rust" enclosure. It features two sealed reed tamper switches, one on the Back plate and one on the Front Cover. The stainless steel naturally reflects the mounting surface and blends easily with any residential or commercial building. Also available is the ELK-150RT with Built-in Siren or the ELK-SL1 Strobe Light that can be added to the enclosure.
The ELK-RJSET is for use with Alarm System Communicators, Line Fault devices, or other equipment as a means of connecting to the incoming telephone line. Includes USOC RJ31X 8 pin modular surface mount jack and 6 ft. 8 wire modular cord with plug on one end and spade terminals on the other.
ELK-1280 Battery: Rechargeable, 12V, 8Ah from ELK Products
ELK Sealed Lead Acid Batteries are excellent for the following applications with regard to size, Amp hour rating, and proper terminal connections: battery backup (for Access Control Systems, Fire Alarm Systems, and Security Alarm Systems), emergency lights, lighted exit signs, and uninterruptible power supplies.
NAPCO's most popular PIR with Advanced detection technology, generous 70' x 60' range and built-in false alarm prevention features. The field-proven PIR1710 passive infrared motion detector offers advanced NAPCO sensor technology for increased reliability and intruder "catch" performance. With a 70' x 60' broad coverage range and look-down creep zone that provides detection coverage directly beneath the sensor, the PIR1710 offers excellent protection for virtually any application. Other enhanced false alarm prevention features include, automatic SSP Signal Selective Processing for the easiest and most stable of installations, temperature compensation, white light protection and RFI/EFI shielding, combining to make the PIR1710 a natural fit for every residential or moderate commercial application, large or small.
GE Security 1125T 3/8" dia. Stubby Press Fit Contacts with Screw Terminals
The Sentrol "Stubby" Press Fit magnetic contact is a 3/8" dia. switch designed specifically for applications where space is limited. The short length makes it ideal for thin framed windows and doors where longer units cannot be used. Press fit ribs on the housing make for quick, easy installation.
GE Security 1275 3/8" dia. Wing Fit Magnetic Contacts
The Sentrol 3/8" diameter Wing Fit magnetic contact is ideal for new construction applications, where wood swell poses a potential threat to the contact housing. The "wings" flex to hold the contact securely in place as the wood expands and contracts.
The Sentrol Roller Plunger contacts save installation time while providing reliable magnetic contact security. The contact switch is activated when the door opens, releasing the tension on the wheel plunger. Drill only one hole to mount the roller plungers; the entire magnetic contact is housed in a economical single unit. Recessed mounting hides the contact within the frame of the door it protects.
1035 Series Miniature Self-Adhesive from GE Interlogix
Sentrol's Surface Mount Self-Adhesive Contact saves installation time through the use of a specially
formulated 3m® adhesive tape. The tape, which establishes a permanent bond between the contact and the
surface, can be repositioned during the first 5 minutes. A low profile and small footprint combine with
reliable Sentrol technology to make this series the perfect magnetic contact for those situations where
drilling holes is impractical.
Sentrol 2202AU Universal Super-Wide Gap Contact from GE Interlogix
Sentrol's Miniature Surface Mount with Armored Cable overhead door
magnetic contact is for use in rigorous environments of commercial and
industrial installations. The floor mount units are constructed with a
low-profile heavy cast aluminum housing. The reed switch assembly is
fully encased in Sentrol's exclusive polyurethane potting material to
prevent damage due to moisture or humidity. A wide operation gap distance
of up to three inches makes installation easy and helps prevent false
alarms caused by door movement or damaged and loose fitting doors.
FlexCore™ Signal Processor - The FlexCore Signal Processor is an Application-Specific Integrated Circuit (ASIC), which processes sound data in parallel rather than sequentially for faster, more accurate detection decisions. The combination of proven FlexGuard™ performance with the speed of FlexCore processing provides unmatched false alarm immunity without compromising detection.
IntelliSense FG-1625F Flush Mount Glassbreak Detector
The new FG-1625F Glassbreak Detector uses the latest technology to provide faster response and increased false alarm immunity. The FG-1625F is specifically designed to allow fast, easy installation, while the adjustable sensitivity settings can compensate for the acoustics of any room. Optimum operation can be quickly verified using the FG-701 Glassbreak Simulator. The FG-1625F was designed to adequately cover all sizes of single gang electrical boxes. Flush mount installations are now easier and better looking than ever.
Honeywell FG1625RFM Glass Break Detector, Round, Flush Mount
The FG1625RFM Glassbreak Detector uses field proven FlexGuard® technology to provide faster response and increased false alarm immunity. The FG1625RFM is specifically designed to allow a fast, easy installation, while the adjustable sensitivity settings can compensate for the acoustics of any room. Optimum operation can be quickly verified using the FG701 Glassbreak Simulator.
The Same Gemini crystal-control range and reliablility performance proven superior in independent tests! Even faced with metal door frames and/or metallic-sided insulation, this product features GEMINI crystal-control and omnidirectional tank circuitry alignment specifically designed to avoid obstructions for maximum signal "punch thru" and reliability.
High-quality 135ºF (57ºC) fixed temperature detector with Rate of Rise
Compatible with NAPCO Express & Gemini series GEM-RECV Series supervised receivers
Circuitry transmits an alarm signal upon alarm condition, generates an hourly supervisory test signal to the receiver, and monitors and annunciates low battery
