Optex BX-80N BoundaryGard™ Multi-Stabilized Outdoor PIR Motion Detector
BX-80N starts your security BEFORE burglars get inside. This attractive and low profile outdoor PIR detects up to 40' on each side, creating an 80'x 3' detection pattern. BX-80N suits almost all outdoor applications because it combines two PIRs, creating extra high immunity against false alarms caused by small animals, cars, and other outdoor disturbances. A selectable piezo buzzer can alert intruders and also serves as a convenient walk test indicator.
Outdoor PIR Protection that covers a building's perimeter: the BX-80N's long, narrow detection area comes from the center point covering both sides.
The BX-80N creates a multi-layered, horizontal barrier that detects intruders and sounds the alarm before they actually break in. Just one BX-80N can protect a long area, because it is installed in the center of the detection area and protects on both sides.
BoundaryGard™ makes you feel secure knowing your building is well guarded.
Features:
- 80ft. Long Range Detection
Optex's advanced PIR technology creates a narrow, 80ft. long range detection area that protects wide horizontal areas, such as a buildings perimeter.
- Limited Detection Range Function
The detection range of the BX80-N can be adjusted to avoid detecting unwanted objects.
- Size Judging Function
The BX80-N has a layered detection pattern that discriminates between large and small objects within the detection area. Only when both the upper and lower detection layers detect movement, does the BX-80N generate an alarm.
- High Durable Housing & Lens
- Metal Guard : MG-1
Helps protect against tampering or vandalism against the unit.
- Easy Installation
Convenient and simple to install, the BX-80N is mounted in the center of the detection area and protects both sides. Since there's no need to align transmitters and receivers, one person can install the BX-80N quickly and easily.
Specifications:
*Specifications and design are subject to change without prior notice.
| Model |
BX-80N |
| Detection Method |
Passive Infrared |
| Coverage |
80ft (24M) (40ft {12m} on each side) |
| Detection Zones |
4 Zones ( 2 on each side) |
| Sensitivity |
1.6°C (3°F) at 0.6m/s (2ft/s) |
| Detectable Speed |
0.3 ~ 1.5m/s (1 ~ 5ft/s) |
| Power Input |
10 ~ 28VDC |
| Current Draw |
Normal 28mA Max. 28mA |
| Alarm Period |
2 ± 1sec |
| Relay Output |
2 Relay outputs N.O. & N.C. 28VDC 0.2A (Max.) each |
| Tamper Switch |
NC Opens when cover removed |
| Test Mode |
On or Off |
| Warm-up Period |
Approx. 45sec (LED blinks) |
| LED Indicator |
LED is blinking during warm-up period
Alarm condition |
| Operating Temperature |
-20 ~ +50°C (-4 ~ +122°F) |
| Environment Humidity |
95% Max |
| RF Interference |
NO Alarm 20V/m |
| Mounting |
Wall, Indoor/Outdoor |
| Mounting Height |
0.8 ~ 1.2m (2.7 ~ 4ft) |
| Weight |
400g (14oz) |
| IP Rating |
IP55 |
| Standard Accessories |
M4 Mount Screws x 20 x 2 |
|
|
|
| |
 |
|
|
