ELK-ESM1 X-10® Signal Meter from ELK Products
| X-10® Signal Meter |
|
| Model:
ESM1 |
|
This
economical X-10 Signal Meter is half the price of most test tools
on the market, yet can do 90% of what the more expensive models
do, including answering questions like:
* Is there an X-10 signal present?
* Is the X-10 signal too low?
* Is there noise interference?
* Is the signal corrupted?
For a
whole house test, use the X-10 transmitter of your choice to continuously
send an X-10 transmission. (i.e. ELK Magic Module, ELK-MM443). Then
move the ESM1 to various AC receptacles located around the house to
verify the signal. |
| The
ESM1 listens to your power line, and displays signal strength of any activity at the X-10 frequency.
It also measures and displays any signal between 100mV and 5 volts (The maximum specified X-10 signal strength). The bar graph LED readout shows signal strength level, while the "X-10 Good" light indicates whether valid X-10 traffic is being received. The
ESM1 is the best value choice for test tools.
|
| SPECIFICATIONS: |
|
Line
Voltage:
Sensitivity:
Frequency Detected:
X10 codes validated on:
Size: Meter:
Size: Transformer: |
120
VAC, 60Hz
100mV to 5.0V max. +/- 10%
120 kHz +/- 10%
Start Code, Alternating Bit Patterns, Total Bit Count
2.5" w. x 2.5" h. x 1.0" d.
2.0" w. x 2.5" h. x 1.7" d. |
|
|
|
|
| |
 |
|
|
