|
RTS451KEY Remote Test Station
The System Sensor RTS451KEY is an automatic fire detector accessory designed to test remotely located duct and beam detectors. For 4-wire detectors, the RTS451KEY features a multi-colored LED that alternates between steady green and red. Green indicates power and that the detector board is in place. Red indicates alarm. For 2-wire detectors, the LED will show red for alarm. Consult the detector installation instructions for additional information.
The National Fire Protection Association has published codes, standards, and recommended practices for the installation and use of this product. It is recommended that the installer be familiar with these requirements, with local codes, and any special requirements of the local authority having jurisdiction.
Specifications
- Dimensions: 4.6" H x 2.75" W x 1.8" D
- Weight: 0.22 Lbs.
- Power Requirements
- Power LED (Green): 14 - 35 VDC, 12 mA maximum
- Alarm LED (Red): 2.8 - 32 VDC, 7.5 mA maximum
- Total Current: 103 mA maximum
- Alarm Response Time: 40 seconds maximum
- Temperature: -10ºC to 60ºC (14ºF to 140ºF)
- Humidity: 95% relative humidity, noncondensing
|
|
|
| |
 |
|
|
