V-Pass Biometric Fingerprint Reader

No cards, keys or even pins required! - The V-Pass is the ultimate biometric reader for physical access to facilities. This reader eliminates the need for PINs, keys or cards to gain access to secure areas. To gain access, the user simply places their finger on the reader and in less than one second the V-Pass confirms or denies access based on a database of fingerprints from authorized users. The V-Pass performs onboard enrollment, identification and template storage for 500 fingerprints.

The V-Pass reader is designed to integrate easily into most access control systems. To function, a fingerprint must be enrolled on the reader and this can be done through the VeriAdmin software included with the reader. Once a fingerprint is enrolled, biometric identification may be performed any number of times. After biometric identification, the reader will generate a Wiegand string based on the ID number of fingerprint template identified and a pre-configured site code. This string is then sent to the Access Control System or other host equipment for appropriate action.

Fingerprint Template Capacity - The V-Pass includes support for up to 200 or 500 fingerprint templates within its internal memory (depending on firmware version). By default, the V-Pass may only retrieve templates from its own internal memory.

Memory - The V-Pass reader utilizes non-volatile flash memory to store all templates and data configurations and therefore will not lose any templates or configuration information if the reader is powered down.

• Fingerprint Identification for access control installations in a self-contained reader
• Automatic finger detection provides one-touch identification
• Industry's most accurate fingerprint algorithm (FVC 2002 & 2004) presented with fluctuations to the fingertip
• Flexible communication options supporting Wiegand formats up to 64 bit
• VeriAdmin software for initial set-up, administration and networking functions
• Intuitive user interface with red, green and amber LED and tone signal

User Interface - The V-Pass has a common user interface. A green LED on the front of the reader indicates that power is on. A bi-color LED on the top of the reader displays green, red, or amber (green and red together). The top LED may display in an off or solid state. The color and state of the top LED may also be customized through the use of the VeriAdmin software. By default, the color and state of the top LED have particular meanings as shown below:

Top LED Indicator	Meaning
Off	Fingerprint Captured - Algorithm Processing
Solid Red	Biometric Identification Failed
Solid Amber	Place Finger on Sensor
Solid Green	Biometric Identification Accepted Enrollment Fingerprint Image Captured