IFS FP1500WDM Fiberpak™ Video with One-way Data Transmission Kit

The IFS FiberPak™ FP1500WDM fiber optic transmission kit includes everything you need to transmit a CCTV signal with one-way PTZ control data on one multi-mode optical fiber. The kit includes a transmitter and receiver that are designed to be universally compatible with major CCTV camera manufactures and supports RS-232 and RS-422 data interfaces and all major data protocols. In addition the kit includes wall mount AC transformers for both transmitter and receiver as well as a complete installation and operations manual. FiberPakTM Videolinks Plug-and-play design and included accessories make selecting the right fiber optic modules for your installation easy.

Compatible with:
• Kalatel® Video and One-Way RS-422 Data
• Pelco® Video and One-Way Type "P" Data
• Pelco® Video and One-Way Type "D" Data
• Sensormatic AD® Video and One-Way Manchester Data
• Vicon® Video and One-Way Modupulse Data

• AM Transmission
• Automatic Resettable Fuses on all Power Lines
• Power Supplies and Installation Manuals Included
• Supports RS-232 or RS-422 Data Interfaces
• Transparent to Data Encoding/Compatible with Major CCTV Camera Manufacturers
• Full Range Automatic Gain Control (AGC)
• No In-field Electrical or Optical Adjustments Required
• NTCIP Compatible
• Full Color Compatibility
• Tested and Certified by an Independent Testing Laboratory for Full Compliance with the Environmental Requirements (Ambient Operating Temperature, Mechanical Shock, Vibration, Humidity with Condensation, High-Line/Low-Line Voltage Conditions and Transient Voltage Protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
• Power, Video Presence In, Data Out, and AGC Status Indicating LED's to Monitor System Performance
• Integrated WDM for Greater Product Reliability
• NTSC, PAL, SECAM Compatible
• Distances up to 2.5 miles (4 km) Without Repeaters
• Comprehensive Lifetime Warranty

• Video
  • Video Input: 1 volt pk-pk (75 ohms)
  • Bandwidth: 5 Hz - 10 MHz**
  • Differential Gain: <5%
  • Differential Phase: <5º
  • Tilt: <1%
  • Signal-to-Noise Ratio (SNR): > 55 dB @ 10 dB ATTN.
• Data
  • Data Interface: RS 232, RS-422
  • Data Format: NRZ, NRZI, Manchester, Bi-phase
  • Data Rate: DC-100 Kbps (NRZ)
• Sync
  • Output Voltage: 4 volt negative pulse
  • Impedance: 75 ohms
• Wavelength: 850/1310 nm, Multimode
• Number of Fibers:
  — VT/VR1500: 2
  — VT/VR1500WDM: 1
• Connectors
  • Optical: ST
  • Power and Data: Terminal Block with Screw Clamps
  • Video and Sync: BNC (Gold Plated Center-Pin)
• Elecctrical & Mechanical
  • Power:
    — Transmitter: 24 VAC C.T. @ 200 mA
    — Receiver: 12 VDC @ 500 mA
  • Number of Rack Slots: 1
  • Current Protection: Automatic Resettable Solid-State Current Limiters
  • Circuit Board: Meets IPC Standard
  • Size (in./cm.) (LxWxH) — Surface Mount: 7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm
  • Shipping Weight: < 2 lbs./0.9 kg
• Environmental
  • MTBF: > 100,000 hours
  • Operating Temp: -40º C to +74º C
  • Storage Temp: -40º C to +85º C
  • Relative Humidity: 0% to 95% (non-condensing)*
    * May be extended to condensation conditions by adding suffix '-C' to model number for conformal coating. (extra cost)