Home View Cart Contact Us Sitemap Order Status

Access Control
Alarm Monitoring
Alarm System FAQ
Anti-Theft Devices
Audio Monitoring - Louroe
Biometrics
Burglar Alarm System Packages
Burglar Alarm Systems
CCTV Video Surveillance
Central Station Equipment
Central Vacuum
Document Center
Driveway Alarms
Entertainment Systems
Extreme CCTV
Fiber Optics
Fire Alarm Systems
Gas Detectors & Alarms
GE Security
Home Automation
Intercom Systems
Locksmith Supplies
Marine Alarms
On-Q Home
Other Stuff
Power Supplies
Professional Audio
Sensors and Detectors
Sirens, Strobes & Horns
Structured Wiring
Telephone Systems
Tools & Test Equipment
Warrantees
Wire & Cable
Z-Wave Home Automation
Discontinued Products
Shop by Brand

Burglar Alarm Systems > Linear Corp
Linear Corp

Linear Corp


EXA-1000 Omni-directional Remote Antenna
EXA-1000 General Specifications

General Specifications

Operating Frequency: 315 MHz
Data Format: DX format
Number of Codes: 1,048,575
Number of Channels: DXR-701, one channel
DXR-702, two channels
Measured Range: 700 feet in one quadrant with DXT-21 transmitter; 500 feet in open air (four quadrant test)
Operating Temperature: 32° to 140°  F (0° to 60° C)
Sensitivity: -95 dBm (typical)
Number of Stored Transmitter Codes: 32 per receiver
Receiver Output: For "C" relay contact, 1 amp, at 32 VDC per channel
Field Selectable Receiver Output Modes: Momentary, four seconds (factory set)
Momentary, one second
Flip-flop toggle
latch, 2-Channel
Mode Button (one per channel)
Learn Mode:
Press and release to enter learn mode
Transmitters
Learned:
Press and hold for five seconds after the last LED flash to delete all transmitters on an associated channel
Erase Memory: Press and hold for five seconds after the last LED flash to delete all transmitters on an associated channel
Clear Latch: Press and release
Clear Low
Battery:
Press and release mode switch on channel 2 (DXR-702 only) to clear low battery
LED Indicator:
Steady: Indicates "learn" mode
Flashing: Indicates number of transmitters learned on the selected channel
RF Activity: Blinks synchronously with detected RF activity
Antenna
DXR-701 Wire lead
DXR-702 F-connector with antenna (supplied)
Input Impedance: 75 Ohm - 2:1 VSWR
Operating Voltage: 11 to 17.5 VDC
12 to 16 VAC
Current: 25 mA at standby at 12 VDC
60 mA in alarm at 12 VDC, DXR-701
90 mA in alarm at 12 VDC, DXR-702
Connectors: Screw terminal,+,-, with N/O, N/C, and common per receiver channel
Dimensions: 5.5 in L x 1.25 in W x 4 in H (140 x 32 x 102 mm), excluding antenna
Accessories: Mounting bracket, screws, and anchors (supplied)
Regulatory Requirements: FCC and DOC

Copyright © 2003 Linear Corporation - All rights reserved

 

 
EXA-1000 Omni-directional Remote Antenna
[Printable View]
  [Search] [My Account] [Home] [Sitemap] [Contact Us] [Link To Us] [Returns] [Privacy] [Terms]
[ Tell a Friend About This Page ]

Copyright © 2003 Bass Burglar Alarms, All Rights Reserved.