Linear TGB-96 Supervised Pattern Recognition Technology Glass Break Detector

The Model TGB-96 Supervised Pattern Recognition Technology Glass Break Detector is a glass break detector with a built-in transmitter designed for use with Linear's SX Format receivers. When breaking glass is detected, the transmitter sends a digitally coded signal to its companion receiver/control.

Coding switches are not required or used in the T-90. Each transmitter is pre-coded at the factory to a unique code. With the SX format, there are more than sixteen million codes possible. The TGB-96 can send three different signals: alarm, low battery and status.

The unit is powered by two 3-volt lithium batteries. These batteries will last for approximately two and one half years under normal climatic conditions. If the battery voltage drops below a preset level, a low battery signal is sent with every alarm or test transmission.

Features

• Dual-technology detection device
• Full RF supervision
• Includes T-90D transmitter board
• Powered from one battery set
• Alarm, supervisory, and low battery transmissions
• Lithium battery powered
• Test, operate LED
• Shatter pro pattern recognition technology
• SX format
• RF frequency: 303.875 MHz
• 4.25" W x 3.13" H x 1.7" D
• Order number: SSA00016