WaterBug® WB-200 from Winland Electronics
The model WB-200 operates on 12 or 24 Volt AC/DC
and has a form C relay output that can be connected to alarm panels,
bells, dialers, etc. The unit can monitor up to as many as six sensor
probes, up to 100 feet away. Each sensor probe has two contacts. When a
film of water forms a bridge between these contacts, the unit senses this
and triggers the alarm output. The sensor will not alarm due to
condensation or high humidity. One standard surface sensor is included
with the unit.
ACCESSORY OPTIONS
- Standard surface sensor - P/N 1040
- Under carpet sensor - P/N 1041
- Wall Transformer P/N 1111
Voltage: 110 VAC - 12VDC regulated, 300mA.
Download PDF
|
Typical Applications:
Residential or Vacation Homes
Basement Sump Pumps
Commercial Buildings
Office and Computer Areas
Unattended Buildings
Greenhouses & Animal Buildings
All Drain Areas
Sprinkler Systems
|
|
|
SPECIFICATION |
VALUE FOR WB-200 |
|
Console Size |
5" x 2.44" x 1.25" (12.7 cm x 6.2 cm x 3.18 cm) |
|
Probe Size (standard P/N #1040) |
2" x 3" x 0.88" (5.1 cm x 7.6 cm x 2.2 cm) |
|
Probe Size (under carpet P/N #1041) |
2" x 3" x 0.18" (5.1 cm x 7.6 cm x 0.5 cm) |
|
Power Requirements (resting state) |
12V or 24V AC or DC |
|
Power Requirements (alarm condition) |
5mA @ 12V or 24V AC, or 13.5mA @ 12V or 24V DC |
|
Sensitivity |
Will not alarm due to high humidity or condensation |
|
Operating Temperature |
Control and Probe 32º to +140º F (0º to +60º C) |
|
Outputs |
Form C (SPDT) 1 Amp @ 24Vac, 1 Amp @ 30 VDC (not for direct high voltage switching) |
|
Recomended Dist. Between Probes & Console |
1-2 probes: 200ft (61 m) max. 3 or more probes: 100ft (30.5 m) per probe |
|
Recommended Max. Probes Per Console |
6 |
|
|
|
| |
 |
|
|
