Honeywell HPS3 Power Supply/Battery Charger
The HPS3 power supply/battery charger converts a low voltage AC input into an output of 6, 12 or 24 VDC at 2.5 A of continuous supply current. This general purpose switching power supply can provide additional power for a variety of applications such as access control, intrusion security, and video system accessories.
Electrical Specifications
- DIP Switch selectable for 6 VDC, 12 VDC or 24 VDC output.
- 2.5 amps of continuous supply current.
- Output is filtered and electronically regulated.
- Built-in charger for sealed lead acid or gel type batteries.
- Maximum charge current of 400 mA. If a battery charger is
used, subtract max charge current of 400 mA from total to
determine allowable load.
- Automatically switches to stand-by battery upon AC fail.
- Battery protected from short circuits.
- Thermal and short circuit protection with auto reset.
- LED indicators for AC input and DC output.
Mechanical Specifications
- Compact design.
- Battery leads and foam mounting tape included.
- Board dimensions: 3.5" L x 3.0" W x 2.0" H.
Note: Special order item. Non-returnable or subject to restocking fees.
|
|
|
| |
 |
|
|
