TEMPERATURE & HUMIDITY ALERT SOLUTIONS |
Digital Temp Alert® DTA-1
Temperature probe #1045 is standard on the DTA-1.
The model DTA-1 operates from 12V DC or AC, features bright LED display and separately adjustable high and low set points. Standard unit monitors temperature from +32 to +130 deg F (0 to 55 deg C). This can be displayed in Deg F or Deg C. Optional probes are available for wider temperature ranges. Alarm condition activates SPST relay to activate alarms, dialers, etc.
ACCESSORY OPTIONS
- Low Temp. Sensor probe for coolers, etc. (15 ft. cable) P/N 1024
Temp Range: -67 to +220 deg F (-55 to +105 deg C).
- High Temp. Sensor probe for hot & dry areas. (6 ft. cable) P/N 1025
Temp Range: -67 to +300 deg F (-55 to +148 deg C).
- High/Low Liquid Temp. Sensor probe. (3 ft. cable) P/N 1026
Temp Range: -67 to +300 deg F (-55 to +148 deg C).
- Accessory Time Delay Module (Model TDL-120). P/N 1193
Adjustable Delay Range: 1 to 120 minute.
|
Download PDF |
- Typical Applications:
- Residential or Vacation Homes
- Commercial Buildings
- Office and Computer Areas
- Unattended Buildings
- Greenhouses & Animal Buildings
- Freezers and Refrigerated Rooms
- Buildings with Controlled Climates
|
Product Number: 1013
Weight: 1.18
|
- Features:
- 8 to 12 V AC/DC powered
- Independently adjustable high and low set points
- Large LED display read in ºF or ºC
- Provides SPDT output
- Supervise remote sensor probes up to 500 ft
- Easy surface mount installation
- One year parts and labor; subject to conditions of limited warranty.
|
|
SPECIFICATION |
VALUE FOR DTA-1 |
Control Unit Display Range (Maximum) |
+32º to +130º F (0º to +54º C) |
Low Limit Adjust Range * |
Sensor Dependent |
High Limit Adjust Range * |
Sensor Dependent |
Recommended Sensor Cable |
18 - 24 AWG twisted Pair (shielded or unshielded) |
Minimum Span (Rec. dist. between high & low set points.) |
4º F (2.2º C) |
Temp/RH Accuracy of Probes |
+/-3º F (+/-1.7º C) For Probes #1045, 1024, 1025
+/-0.5º F (+/-0.28º C) For Probes #1026
|
Temp/RH Accuracy of Control Unit |
+/-1.8º F (+/-1.0º C) |
Temp/RH Response Time |
Sensor Dependent |
Temp/RH Sensing Element |
Linear Transducer |
Outputs (not for high voltage use) |
1 SPDT relay |
Contact Output Rating |
1 Amp @ 30 VDC 1 Amp @ 30 VAC 50-60Hz (not for direct high voltage switching) |
Input Voltage Requirements |
8 to 14 VDC @ 200mA 8 to 14 VAC 50-60 Hz @ 10VA min. |
Contact Output Rating |
1 Amp @ 30 VDC (not for direct high voltage switching) |
Current Draw (Alarm condition) |
225 mA @ 8-14 VDC |
Control Box Material |
ABS |
Weight |
13.6 oz. (386 g) |
Dimensions |
6.25" x 3.75" x 2" (15.9 cm x 9.5 cm x 5.1 cm) |
Mounting |
2 Key slots in rear panel |
|
|
|
| |
|
|
|
