Protech SDI-76XL2V Outdoor Motion Sensor With Camera Mount: 50' x 50' Wide

Description
The XL2V version of the PIRAMID features an expanded outdoor housing for the internal mounting of a video camera. The PIRAMID XL2V is equipped with a universal mounting bracket and the space available to accommodate many small CCD Cameras (see Maximum Camera Dimensions listed in specifications section). The PIRAMID XL2V sensor offers a form C relay output to activate carious video switching equipment.

Features

• STEREO DOPPLER MICROWAVE DETECTOR
  Two receiving channels with the ability to eliminate vibration and periodically moving objects as sources of false alarms.
• DUAL ELEMENT INFRARED DETECTOR
  Ignores normal temperature variations yet is very responsive to rapid infrared changes created by an intruder.
• BALANCED TEMPERATURE COMPENSATION
  Stereo Doppler Microwave and Passive Infrared portions automatically adjust detection parameters to compensate for losses in range that occur at elevated temperatures.
• CAMERA VIEWING APERTURE
  1 3/8" diameter viewing aperture no face of sensor..
• STEREO DOPPLER SUPERVISION
  A component failure will cause the sensor to lock-in alarm.
• DIGITAL RANGE CONTROL
  Ten-position digital switch adjusts how far the sensor detects (to it's maximum range).
• DIGITAL SENSITIVITY CONTROL
  Ten-position digital switch adjusts the amount of movement required to initiate an alarm condition.
• ENHANCED BIRD/IMMUNITY CONTROL
  Two-position switch adjusts the sensors immunity to birds and small animals.
• MASTER LED
  Displayed on the face of the unit indicating the alarm relay status.
• ANALYTIC LED'S
  Alarm and Environmental Caution LED's for both technologies displayed on the face of the sensor. An internal switch can disable both Master and Analytic LED's.
• WALK-TEST SOUNDER
  Optional audible tester to assist in the walk-test and initial sensor setup. The XL-Sounder greatly simplifies the installation as it enables walk-testing and adjustment by a single installer.
• SWIVEL MOUNTING
  180º Horizontal Adjustment, 90º Vertical Adjustment.
• TAMPER-PROOF
  Tamper switch with terminal connection.
• ALL SOLID STATE RELAY
  User selectable Form C relay output. A Solid State relay is flexible, silent and more reliable than an electromechanical relay.
• METAL RAINTIGHT HOUSING
  Rugged, weatherproof housing offers maximum protection against RFI and EMI interference.
• WEATHER SHROUD
  Metal hood that routes rain from sensor's face and also provides maximum protection from ice, snow, wind and sun loading.

Specifications

• Input Voltage: 8.5 to 20 VDC
• Current Consumption: 130 ma @ 12 VDC (LED's Off)
• RF Power Density: 120 uw/cm2 max. at the face of the unit.
• Operating Temperature: -30ºF to 130ºF, -34ºC to 54ºC
• Relay Contact Rating: 0.05A @ 130 VDC
• Maximum Camera Demensions: 5.5" L x 2.25" W x 3.25" H
• Relay Contact Rating: 0.05A @ 130 VDC
• Housing Dimensions: 6 1/4"L x 8"W x 4 3/4"H
• Shroud Dimensions: 10"L x 8 1/2"W x 51/4"H
• Stereo Doppler Range: Stereo Doppler portion adjustable from 10% to full range.
• Sensor Range: Automatically maintained by Balanced Temperature Compensation Circuitry.
• Frequency: 10.525 GHz
• Note: Additional frequencies available to satisfy various international requirements.