|
| Access Control > Linear > Single Door Controllers |
 |
|
|
Linear Linear Single Door Controllers
Linear's single door controller entry systems are an excellent way to control access at a single entry point.
Common Features
- Up to 480 programmable input codes.
- 4 independent outputs with programmable actions, activation times.
- Dual color LED indicators for access, lockout, and programming status.
- Tactile feedback ensures complete key presses.
- Internal sounder with selectable volume levels.
Up to 480 codes (1 to 6 digits each) can be programmed
via any Linear keypad without need for a separate
programmer. Each can activate either or both relay
outputs.Timed anti-passback prevents use of the same
code again before time elapses.
SENSE input: If programmed for “door sense,” input is
wired to a normally closed switch to detect when door is
open or closed. Forced entry or door ajar situations can
be detected. If programmed for “inhibit,” input can be
wired to service switch or timer to disable main relay.
REQUEST-TO-EXIT input: Can be wired to a pushbutton
for codeless activation of main relay, auxiliary relay, output
3, or output 4.
ALARM shunt:Activates when access is granted. It can
be wired to shunt alarm contacts on the access door/gate
to prevent alarming when access is authorized.
Other programmable features include: system reset
key(s); entry code length; adding a PIN; erasing any or all
PINs; changing master code; on-time for each output;
keypad lockout upon incorrect PINs; and anti-passback
time period (or no anti-passback). EEPROM memory
retains all entry codes and programming, even without
power.
Common Specifications
- ELECTRICAL
Voltage: 12-24 Vac or Vdc (ac supply must be isolated); power can be from access device or separate supply
Outputs: Relay #1, Form “C” 5 Amps @ 28 Volts maximum; Relay #2 (Auxiliary), Form “C” 1 Amp @ 28 Volts maximum; solid-state outputs (Outputs #3 and #4), short-to-common 100 mA @ 30 Vdc maximum
Inputs: a. Open Request: terminal input activates the programmed control relay b. Door Sense/Inhibit: monitors status of a protected door or can be programmed to restrict access to relay 1 c.Keypad: for programming and PIN code entry
Display: two LEDs for system activity and program data
Sounder: programmable activation from key presses or output
- ENVIRONMENTAL
Temperature: -22°F to +149°F (-30°C to +65°C)
Humidity: 5% to 95% non-condensing.
|
|
|
|
Linear AK-1 Exterior Digital Keypad |
|
|
|
|
|
Linear AK-2 Interior Digital Keypad |
|
|
|
|
|
Linear AK-2W Weather-resistant Digital Keypad |
|
|
|
|
|
Linear AK-3 Low-cost Interior Digital Keypad |
|
|
|
|
|
Linear AP-4 Single-portal Access Controller |
|
|
|
|
|
Linear MGT Safety Gate Edge Transmitter |
|
|
|
|
|
Linear AK-1 Exterior Digital Keypad (ACP00738)
The Model AK-1 Exterior Digital Keypad is a digital keyless entry system designed for access control applications. The keypad is housed in a rugged cast aluminum enclosure that can be mounted to a pedestal or bolted directly to a wall. The die-cast keys have bright, easy-to-read yellow graphics.
|
|
|
|
|
|
Linear AK-2 Interior Digital Keypad (ACP00885)
The Model AK-2 Interior Digital Keypad is a digital keyless entry system designed for access control applications. The keypad is housed in a rugged, plastic enclosure and is designed to be mounted in a standard single-gang electrical box. The die-cast keys have bright, easy-to-read yellow graphics.
|
|
|
|
|
|
Linear AK-2W Weather-resistant Digital Keypad (ACP00912)
The Model AK-2W Weather-resistant Digital Keypad is a digital keyless entry system designed for outdoor access control applications. The keypad is housed in a rugged, plastic enclosure and is designed to be mounted in a standard single-gang electrical box. The die-cast keys have bright, easy-to-read yellow graphics.
|
|
|
|
|
|
Linear AK-3 Low-cost Interior Digital Keypad (ACP00903)
The Model AK-3 Low-cost Interior Digital Keypad is a digital keyless entry system designed for access control applications. The keypad is housed in a rugged, plastic enclosure and is designed to be mounted in a standard single-gang electrical box. The die-cast keys have bright, easy-to-read yellow graphics.
|
|
|
|
|
|
Linear AP-4 Single-portal Access Controller (ACP00894)
The Model AP-4 Single-portal Access Controller is designed for a broad range of access control applications. Its wireless design and small size make it easily adaptable for a variety of access control requirements. Typically, the AP-4 is used to control a door strike, barrier gate, automatic gate or automatic door operator.
|
|
|
|
|
|
Linear MGT Gate Safety Edge Transmitter (DNT00068)
The MGT is for adding fully supervised obstacle sensing for motorized gates, doors or barrier arms in any Linear access control system. It mounts directly on the gate, door, or barrier and wires to a standard exterior safety edge sensor (for full featured compatibility, a Miller gate edge sensor with an optional .001 UF capacitor is recommended). If an object is hit during the gate closing, the sensor will present a closed circuit across the connecting wires and the MGT will transmit a message to the access controller to reverse the movement of the gate. Compatible with AM/II, AM-3, AE-1, AE-2, AE-500, AE-1000, AE-2000, and AP-4 commercial telephone entry and access controllers. Also compatible with RE-1 and RE-2 residential telephone entry systems.
|
|
|
|
|
|
MCT-1 MegaCode garage door openerThe MCT-1 MegaCode digital transmitter is a wireless radio control designed for use with automatic garage/gate operators. The MegaCode radio format provides unparalleled security. The format provides more than a million different codes. Features:- Activates one MegaCode receiver
- Test/operate LED
- Visor mounting clip supplied
- Power: 9 V battery
- Frequency: 318 MHz
- Codes: 1,000,000+ (factory precoded)
- Dimensions: 2.16 x .95 x 3.75 inches
Technical Documents |
|
|
|
|
|
|
